Page 1 of 4 1234 LastLast
Results 1 to 10 of 33
  1. #1
    New Member
    Join Date
    Nov 2012
    Posts
    11
    Location
    Murfreesboro, tn
    Tractor
    None yet

    Default 2013 5065e or 5075e

    Stopped off at the local jd dealer today.. To get some quotes for the 2013 5065e and 5075e with the power reverse. I am trying to keep my purchase no more than 35k.. It is looking like I will have to go with 65e in order to make the deal as the 75 was about 2500 over my budget. First question do you think I will really notice the 10hp? Is the frontier rc2084 cutter worth the 3200.00 price tag? Anyone else have any price quotes they can share for the 2013 5065 or 5075e with fel?

  2. #2
    Veteran Member
    Join Date
    Dec 2009
    Posts
    1,808
    Location
    S. W. Virginia
    Tractor
    Kubota B3200, Ford NAA, IH 454D, Case 1845C

    Default Re: 2013 5065e or 5075e

    Not sure on the tractor itself, but I'd avoid getting the RC2084 (or any single spindle 7' cutter). It will be very long and cumbersome and take more power than you'd imagine. For that price you could get an MX6, or spend a bit more and get a MX8. Generally an 8' dual spindle takes less power to run than a 7' single spindle cutter.
    Kubota B3200
    Ford NAA Jubilee
    International 454D
    Case 1845C skid steer
    JD 265

  3. #3
    Bronze Member
    Join Date
    Mar 2007
    Posts
    65

    Default Re: 2013 5065e or 5075e

    Quote Originally Posted by Verticaltrx View Post
    Not sure on the tractor itself, but I'd avoid getting the RC2084 (or any single spindle 7' cutter). It will be very long and cumbersome and take more power than you'd imagine. For that price you could get an MX6, or spend a bit more and get a MX8. Generally an 8' dual spindle takes less power to run than a 7' single spindle cutter.
    Can't help you with the 5065E, but I just got a quote on a 2013 5055E with 553 loader , hood guard, 16.9-28 tires and all the valves and what not and Power Reverser and after the discount for the power reverser it was just under $30,000 delivered to my place and I that was the first written offer, haven't haggled on that yet.

    Dan

  4. #4
    New Member
    Join Date
    Nov 2012
    Posts
    11
    Location
    Murfreesboro, tn
    Tractor
    None yet

    Default Re: 2013 5065e or 5075e

    It seems that from what I read, some people just buy the smaller tractor in the series and hop them up later to get the extra hp. That would for sure give me enough room to get the mx8 if I got the 5055e

  5. #5
    New Member
    Join Date
    Nov 2012
    Posts
    11
    Location
    Murfreesboro, tn
    Tractor
    None yet

    Default Re: 2013 5065e or 5075e

    I was looking at about 32000 for the 65 with fel, tires filled, hood guard.

  6. #6
    Veteran Member Piston's Avatar
    Join Date
    Sep 2008
    Posts
    2,412
    Location
    Central MA, Lakes Region NH
    Tractor
    Kubota L4610 and John Deere 410

    Default Re: 2013 5065e or 5075e

    I assume you guys are talking about non cab versions right? How much extra does the cab version cost? Also, if you get the power reverser, the EPTO option comes with it right?
    I have been trying to find some sort of comparison between the 5075E with cab, and the New Holland T4.75 with cab but they are both still so new that there isn't much info on them.

    Is the deere Tier 4 yet? The NH is still teir 3.
    Kubota L4610 and John Deere 410 - WR Long 64" Grapple (best attachment ever!) QA front forks, rear forks, Brown 472 HD Rotary Mower, Land Pride RBT4096 hydro blade, Woods 7200 Power Rake, homemade 3 pt log splitter, Land Pride rake/blade combo, Land Pride HRL 3578 box blade (Hydro scarifiers), Shaver SC50 3 pt. Stumpgrinder, FitRiteHydraulics TnT, 6" Vermeer PTO Chipper (Hydro feed), Disc Plow, Ratchet Rake, LP HD25 Hydraulic PHD, Woodmizer LT15 portable sawmill
    Rear Remotes Install

  7. #7
    New Member
    Join Date
    Nov 2012
    Posts
    11
    Location
    Murfreesboro, tn
    Tractor
    None yet

    Default

    Quote Originally Posted by Piston
    I assume you guys are talking about non cab versions right? How much extra does the cab version cost? Also, if you get the power reverser, the EPTO option comes with it right?
    I have been trying to find some sort of comparison between the 5075E with cab, and the New Holland T4.75 with cab but they are both still so new that there isn't much info on them.

    Is the deere Tier 4 yet? The NH is still teir 3.
    Yes, this is the open station. I think I read that the cab add a good 7-9k on another thread. I know the M series with the power reverser has the epto. But I am not sure if the e series will have it. I will ask the dealer today. I do agree information is light on the new model.

  8. #8
    New Member
    Join Date
    Nov 2012
    Posts
    11
    Location
    Murfreesboro, tn
    Tractor
    None yet

    Default

    Quote Originally Posted by Jmarnott

    Yes, this is the open station. I think I read that the cab add a good 7-9k on another thread. I know the M series with the power reverser has the epto. But I am not sure if the e series will have it. I will ask the dealer today. I do agree information is light on the new model.
    Actually I just looked on the jd site it looks like the power reverser does have to epto/standard.

  9. #9
    Veteran Member
    Join Date
    Apr 2004
    Posts
    1,899
    Location
    East Coast of Lake Huron
    Tractor
    Deere, several

    Default Re: 2013 5065e or 5075e

    Some of those tractors are identical except for the decal on the hood and the fuel calibration.

  10. #10
    New Member
    Join Date
    Nov 2012
    Posts
    11
    Location
    Murfreesboro, tn
    Tractor
    None yet

    Default

    Quote Originally Posted by Jmarnott
    Stopped off at the local jd dealer today.. To get some quotes for the 2013 5065e and 5075e with the power reverse. I am trying to keep my purchase no more than 35k.. It is looking like I will have to go with 65e in order to make the deal as the 75 was about 2500 over my budget. First question do you think I will really notice the 10hp? Is the frontier rc2084 cutter worth the 3200.00 price tag? Anyone else have any price quotes they can share for the 2013 5065 or 5075e with fel?
    Well went back today to do a final check on time frame in which the 2013 will start to be available to be ordered. THEY TOLD ME APRIL.!!! Wth. How is JD going to compete with having power reverser in April when other brands offer it now.. I did have him run the quote for a 2012 5075e w/fel and I was about 33k.. Any other quotes on the 2012 5075e

Page 1 of 4 1234 LastLast

Similar Threads

  1. 2013 5075E Cab
    By trook in forum John Deere Buying/Pricing
    Replies: 5
    Last Post: 01-23-2014, 10:32 PM
  2. Price Check Price check on 5065E and 5075E
    By rod330 in forum John Deere Buying/Pricing
    Replies: 17
    Last Post: 04-24-2013, 07:32 PM
  3. 2013 price changes- 5065e
    By Rmd8136 in forum John Deere Buying/Pricing
    Replies: 0
    Last Post: 10-03-2012, 10:32 PM
  4. Changes in MF 2013 line
    By Mike476 in forum Massey Ferguson Owning/Operating
    Replies: 0
    Last Post: 06-07-2012, 03:15 PM
  5. JD 5065e vs JD 5075e
    By JD BUCK in forum John Deere Owning/Operating
    Replies: 5
    Last Post: 07-28-2011, 12:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.