Results 1 to 10 of 19
-
12-30-2012, 06:02 AM #1New Member
- Join Date
- Dec 2012
- Posts
- 10
- Location
- NE.WI
- Tractor
- jd2720
Looking For Input
Long time lurker here. Looking at tradeing in a 2320 for a 2720. 2320 has R4's, 200cx loader, 100 hours, and thrid valve.
$8550 plus tax and my 2320 for 2013 2720, 200cx loader,R4's, third valve, engine block heater, and bb2060 box blade. Whats your opinion on these numbers?Last edited by trackid; 12-30-2012 at 06:46 AM.
-
12-30-2012, 06:53 AM #2
Re: Looking For Input
Hi from Arizona I'm sure as soon as the group wakes up you will get some information on your question.
-
12-30-2012, 09:11 AM #3
Re: Looking For Input
Welcome trackid!!! IMO, $8550+ sounds high to me.. I would think around $6000 to $6500 is where you want to be.
Used compacts hold their value very well, and yours only has 100 hrs. What year is yours? Not that the year really makes that much difference on value.2007 JD 2305, 2008 JD 2520 w/200cx loader, Harbor Freight quick hitch, homemade pallet forks, 5' KK tiller, 5' KKxb disc, 4' landpride pulverizer, Frontier RB1072 blade, homemade 5 1/2' lawn roller at 3500lbs, 2005 John Deere 797 w/60" deck, 2009 John Deere 997 w/ 72" deck, 2005 JD HPX Gator w/power dump, 1998 Toro 455D 10.5' deck!
-
12-30-2012, 09:12 AM #4Super Member
- Join Date
- Nov 2011
- Posts
- 6,461
- Location
- Ohio
- Tractor
- Kioti DK 40-Massey ferguson 135-Simplicity Conquest
Re: Looking For Input
Murph ------------ Sent from my HP laptop
Nothing runs like a Deere when being chased by a Kioti
-
12-30-2012, 11:57 AM #5
Re: Looking For Input
Howdy from MIchigan
What year is your 2320?2012 JD 2320, HOMEMADE CANOPY, 54" FRONT BLADE, 54" MID DECK MOWER, HYDRAULIC ANGLE 60" REAR BLADE, QUICK HITCH, STAINLESS FRONT MOUNT SPRAY TANK W/BOOM, 200CX LOADER W/ 61" BUCKET, HOMEMADE BALLAST BOX,HOMEMADE BUCKET GRAPPLE
1998 "BIG DOOLEY" Chevy K3500 Crew Cab (36.000 miles & counting)
United Steel Workers Union 12934
-
12-30-2012, 02:02 PM #6New Member
- Join Date
- Dec 2012
- Posts
- 10
- Location
- NE.WI
- Tractor
- jd2720
Re: Looking For Input
The 2320 is a 2010.
-
12-30-2012, 02:43 PM #7Super Member
- Join Date
- Feb 2008
- Posts
- 7,750
- Location
- somewhere usa
- Tractor
- stuff
Re: Looking For Input
Trading up so soon after purchasing the 2320 is very costly. Not to be nosy but I see you are listed as 51-100 acres, I have to ask would you be better off sticking with what you have and adding a larger tractor later? I have had only one tractor before but find that having more than one size tractor is very beneficial. As I see it it appears you are losing about $4000 or better in this trade, I would be reluctant to do that. Might want to think about a tractor larger than a 2720 for some of the bigger jobs and keep the 2320 for the close work.
-
12-30-2012, 03:36 PM #8
Re: Looking For Input
The 2320 is a popular sized tractor and you have the FEL which is very popular.
I searched long and hard for a used ( nearby ) JD2320 and Kubota B2320 before buying new.
I didn't want to do a days travel to look at a used tractor but some people will.
I sold my Cub Cadet 1864 this summer on C. List and the guy drove 8 hours from Indiana to look at it.
I would try and list the tractor yourself locally before going to a dealer trade-in.
You haven't even done 2 oil changes yet so it is still very desireable.
They will try to make a min. 2-4 thousand selling your old one.
Selling yourself will bring you more money and a new replacement is usually a couple days wait.
Just my opinion
Test the water on C.List at least.2012 JD 2320, HOMEMADE CANOPY, 54" FRONT BLADE, 54" MID DECK MOWER, HYDRAULIC ANGLE 60" REAR BLADE, QUICK HITCH, STAINLESS FRONT MOUNT SPRAY TANK W/BOOM, 200CX LOADER W/ 61" BUCKET, HOMEMADE BALLAST BOX,HOMEMADE BUCKET GRAPPLE
1998 "BIG DOOLEY" Chevy K3500 Crew Cab (36.000 miles & counting)
United Steel Workers Union 12934
-
12-30-2012, 05:28 PM #9
Re: Looking For Input
Assuming your needs have changed and you are willing to spend some money and you have 50 acres you may want to consider a larger tractor. There just isn't much difference between the two models you are talking about. Go p to a 3000 or 4000 series.
Gary
JD 4520, 400X FEL, Frontier Front Blade, Box Blade, Rotary Cutter, Landscape Rake, 48" Wildkat Grapple and PHD
-
12-30-2012, 06:59 PM #10New Member
- Join Date
- Dec 2012
- Posts
- 10
- Location
- NE.WI
- Tractor
- jd2720
Re: Looking For Input
My needs are the same. Want faster hydraulics. 5% home use ,snow removal with3 pt blower,when we get big storms 12+". The remaining 95% I use it for small food plots on wooded land. I'm maintaining trails and some firewood gathering there also. The tractor is trailered to the wooded land. By staying with a 2720 I am able to keep all my implements.
Similar Threads
-
Buying Advice Need your input
By nebraskasparks in forum Buying/Pricing/ComparisonsReplies: 0Last Post: 06-04-2010, 12:29 PM -
need some input
By quackaddict in forum YanmarReplies: 28Last Post: 11-26-2009, 09:28 PM -
TC 30 any input please?!
By Timmmmah in forum New Holland Buying/PricingReplies: 21Last Post: 01-13-2006, 03:32 PM -
JX 55 Input
By VTPlumber in forum Case-IHReplies: 8Last Post: 03-23-2005, 06:14 AM -
BX Input Please
By Hootie in forum Kubota Owning/OperatingReplies: 5Last Post: 06-11-2002, 03:56 PM


Reply With Quote

