Results 31 to 40 of 43
-
02-18-2013, 08:30 AM #31Member
- Join Date
- Jan 2013
- Posts
- 35
- Location
- South Dakota
- Tractor
- 2013 John Deere 5093e, 2011 Gehl 5240e Skid Steer, 1949 John Deere MT, 1972 John Deere 800 windrower, restored
Re: Pulled the trigger today on a 5093e!
I have to agree with you on the manufacturing/inventory perspective. I ordered the tractor Jan 9th, took delivery Feb 15th and they were ready to deliver on the 13th after dealer installs. Right at 5 weeks from order to farm which is darn quick in my book.
I may have been a little over anxious on the Blizzard comment above, it sounds like they're forecasting a whopper to hit the mid section of the country on Thursday (including my area, heavy snow and wind is all they'll say at this point). Might get to exercise it sooner than I thought!!
-
02-19-2013, 01:04 AM #32Bronze Member
- Join Date
- Dec 2012
- Posts
- 56
- Location
- Western NC
- Tractor
- green
Re: Pulled the trigger today on a 5093e!
Ordered mine 12/29 or thereabouts, dealer projection was first week of March. Good luck with the weather out there.
JD 5085M *JD 6110 w 640 loader *JD 6330 *AC F2 Gleaner * Ford 7.3 PSD x 2
-
02-20-2013, 04:15 PM #33New Member
- Join Date
- Feb 2013
- Posts
- 4
- Location
- South Dakota
- Tractor
- Minneapolis Moline
Re: Pulled the trigger today on a 5093e!
That is a very nice tractor! I hope to get something like that. I think you got a good deal from Schunemans, I may have to check them out up here. Hope you keep the snow down there so you get the chance to use that new machine. Do you think the new E's are about the same as say the 2011 M's with all the updates they have done?
-
02-20-2013, 07:31 PM #34Member
- Join Date
- Jan 2013
- Posts
- 35
- Location
- South Dakota
- Tractor
- 2013 John Deere 5093e, 2011 Gehl 5240e Skid Steer, 1949 John Deere MT, 1972 John Deere 800 windrower, restored
Re: Pulled the trigger today on a 5093e!
Thanks! I may have gotten a similar deal from other JD dealers, but my salesman was very good and I feel real confident in him. We'll try to keep the snow down this way, it already sounds like they are backing off the amounts now.
As far as M's vs E's, others on this board are more qualified than me to answer that, I can only speak to what I saw when driving the two. The new cab design brings many of the M's features to the E series, but the M has many upgraded features the E doesn't. I would have LOVED the M series, I just couldn't justify the cost difference (~10-12k for the same hp). I would have prefered the M's electronic MFWD engagement and auto engage feature, the throttle is on the side counsel instead of a lever off the dash, the PTO/ePTO is also on the side counsel instead of a lever behind the seat and the air seat is much nicer than the one in the E. That said, the new E cab is much nicer than the old one in my opinion and enough of game changer that I stayed with the E.
On the outside, you have electronic 3pt controls on the fender, better 3pt arms with higher lift capacity and many other things I'm not listing (and I'm sure others will add or correct where I go wrong).
With that said, I am thrilled with my E, it is more tractor than I ever thought I'd own!
-
02-20-2013, 08:09 PM #35Veteran Member
- Join Date
- Mar 2007
- Posts
- 1,368
- Location
- South Carolina
- Tractor
- 2008 John Deere 5203 MFWD(56hp/47pto hp turbo) & John Deere 910A 22hp Kawasaki/54" deck
My local dealer has 4 stores in an hour radius. The closest one to me is 15 mins. I have yet to see an M series tractor on any of their lots (brand new). They did get a couple in trade-ins though. What I can tell you is he keeps all of his stores FULL of 5d, 5e, 5e limited tractors. They are tucked in there right along with the half a million dollar sprayers, $450,000 combines, and a bunch of 6d, 6r, and 8r tractors. These are what sell around here. Now he does have some compacts but not nearly as wide of a selection as the others I mentioned. I literally walked two rows of JUST 5083, 5093, and 5101 tractors today while I was there. That was just two rows.lol
John Deere 5203 MFWD
John Deere 910A 54" 7-Iron PRO deck
-
02-20-2013, 09:18 PM #36Member
- Join Date
- Jan 2013
- Posts
- 35
- Location
- South Dakota
- Tractor
- 2013 John Deere 5093e, 2011 Gehl 5240e Skid Steer, 1949 John Deere MT, 1972 John Deere 800 windrower, restored
Re: Pulled the trigger today on a 5093e!
Something else for those looking at buying, when I made my deal in Jan I negotiated 5 years 0% with JD Credit on the balance owed. When my salesman showed up with the tractor and the paperwork, he had gone ahead and made it 6 years 0% without my asking. deere will do this guys if that is a swaying factor for your purchase, my deal is proof.
-
02-20-2013, 09:31 PM #37
-
02-21-2013, 01:31 AM #38Bronze Member
- Join Date
- Jan 2013
- Posts
- 75
- Location
- Arkansas
- Tractor
- JD 5093e, JD 2240, Bobcat 773G, F800 w/ 16' lo pro Chandler bed
Re: Pulled the trigger today on a 5093e!
On a MFWD 5093e ROPS with FEL, my salesman acted like 0 for 48 was their special deal and it would cost me an extra $1,000 to get 0 for 60. This was about 3 weeks ago. You didn't get 72 months for the same price as 48 months price did you? If so, that would definitely help me in my decision making. Kubota offered me 0 for 60 and NH offered 0 for 48.
-
02-21-2013, 09:05 AM #39Bronze Member
- Join Date
- Dec 2012
- Posts
- 56
- Location
- Western NC
- Tractor
- green
Re: Pulled the trigger today on a 5093e!
Ya you have to buy down to 0% 60 mos, it adds another $1000 or so. I'm sure there is some variation, but I know my dealer well, have bought many tractors over the years, and no BS. Not that I'm any expert on John deere credit - but my experience is that you pay to get the longer note. This from my 12/29/12 order of a 5085M. If you didn't pay extra for the longer note then congrats, and enjoy it! I think all of us are pleased with the 0% deals - it allowed me to bump up to the M. All my operators will feel like they got a raise
JD 5085M *JD 6110 w 640 loader *JD 6330 *AC F2 Gleaner * Ford 7.3 PSD x 2
-
02-21-2013, 02:03 PM #40Member
- Join Date
- Jan 2013
- Posts
- 35
- Location
- South Dakota
- Tractor
- 2013 John Deere 5093e, 2011 Gehl 5240e Skid Steer, 1949 John Deere MT, 1972 John Deere 800 windrower, restored
Re: Pulled the trigger today on a 5093e!
Similar Threads
-
Pulled the trigger today!
By flatpik6 in forum Mahindra Buying/PricingReplies: 11Last Post: 03-31-2012, 03:57 PM -
Pulled the trigger today
By rober in forum Case / IngersollReplies: 7Last Post: 08-01-2011, 08:32 PM -
Pulled the trigger today on a new Boomer 1030 today.
By Scaper in forum New Holland Buying/PricingReplies: 2Last Post: 07-19-2011, 03:20 AM -
Pulled the trigger today...
By Daniel G in forum Cub Cadet L&GReplies: 2Last Post: 08-09-2010, 09:25 PM -
Pulled the trigger today...
By billyo in forum John Deere Buying/PricingReplies: 33Last Post: 06-13-2006, 08:48 PM


Reply With Quote

