JD46 Backhoe for 2520
- Thread starter AKfish
- Start date
JasonL
Silver Member
If I recall correctly, I paid $5300 one year ago. I installed it myself, and I have a 13" bucket.
Edit: This included 6% tax, but did not include power beyond.
Edit: This included 6% tax, but did not include power beyond.
Cliff_Johns
Elite Member
Deere also says you should have the tall folding ROPS for use with the 46.
At least that was true on the previous models (4110,4115). This may not be true anymore with the 2520.
Cliff
At least that was true on the previous models (4110,4115). This may not be true anymore with the 2520.
Cliff
Chris2520
Platinum Member
I paid 5368.00$ for my 46 hoe with 16 inch bucket . it did include the power beyond. and the dealer installed it. but , it was with my package deal when i bought my 2520....
Chris..
Chris..
JasonL
Silver Member
Cliff_Johns said:
I decided not to get the taller ROPS( figured I could get it later if I cracked my head
!) I am 6' 1" 230 lbs, and I haven't had any problems. Jason
kennyd
Advertiser
JDCAN said:
PowerBeyond is the hydraulics that power the hoe, it should be about $220ish or so...
Cliff_Johns
Elite Member
JasonL said:I decided not to get the taller ROPS( figured I could get it later if I cracked my head
I'm not sure that they reccommend the tall ROPS because you might hit your head while you're working the hoe, as much as when you roll the tractor while you're working the hoe. To make the saftey space for the person in the hoe seat, I think you need the taller ROPS -- especially if you're tall.
Cliff
Cliff_Johns
Elite Member
JDCAN said:
Yes.
JDCAN said:
It has to be there for the hoe to work. I'm sure they will itemize it on the bill.
Cliff