Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    May 2012
    Posts
    46
    Location
    North Plains, OR
    Tractor
    Craftsman Push Mower

    Default 30 inch Mechanical Tiller Adaptor Parts

    I am I terested in buying a used 30" tiller for my 345. I found one available. The current owner said that it came with her 345 that she bought used 8 years ago.

    So, the attachment kit must still be on her tractor. If I buy the tiller from her, I'll need to know what parts need to be removed from her tractor and what tools I'll need to bring with me.

    Anyone have this setup and can send some photos? Do you like this rototiller? Is it worth $350?

    Thanks,

    Mark
    Attached Thumbnails Attached Thumbnails -5fb5jb5me3k93j93h5c527bde8202b4991345-jpg  

  2. #2
    Member
    Join Date
    May 2012
    Posts
    46
    Location
    North Plains, OR
    Tractor
    Craftsman Push Mower

    Default

    Found this in the online manual.

    Is it really just the 4 pins?

    "Install Tractor Rear-Frame Hardware

    M96287 M96276 1. From bag of parts, install one spacer (A) on each M12 x 1.75 x 50 mm flange bolt (B). 2. Install spacers and bolts in BOTTOM holes at rear of tractor frame and secure with M12 x 1.75 locknuts (C) on inside of tractor frame. Tighten locknuts to 105 Nm (78 ft-lb). Install Tractor Mid-Frame Mounting Pins

    IMPORTANT: Avoid damage! If spacer (E) falls out of draft arm (A) when pivot bolt (D) is removed, return spacer to its original position inside the draft arm hole. Damage may occur if spacer is missing or improperly installed.

    M96288 1. Locate draft arms (A) under left and right tractor foot rests. Remove locknut (B), washer (C), and pivot bolt (D) from each side. Discard original pivot bolts."
    Attached Thumbnails Attached Thumbnails -omm141979_j969-jpg   -omm141979_j980-jpg   -omm141979_j9a8-jpg  

Similar Threads

  1. 30" mechanical tiller
    By dwilken5 in forum John Deere Lawn & Garden
    Replies: 2
    Last Post: 04-15-2011, 04:08 PM
  2. Tiller 36 inch tiller, is it worth buying????
    By Anonymous Poster in forum Attachments
    Replies: 5
    Last Post: 04-29-2002, 07:17 AM
  3. tiller newbie notes
    By fractal in forum Owning/Operating
    Replies: 46
    Last Post: 03-30-2002, 08:07 AM
  4. Tiller Tiller
    By Titanic in forum Attachments
    Replies: 47
    Last Post: 02-18-2002, 06:41 PM
  5. 60 inch heavy duty tiller
    By David USMC in forum Kubota Buying/Pricing
    Replies: 2
    Last Post: 07-25-2000, 03:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.