Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Dec 2012
    Baraboo, WI

    Default 345 PTO won't engage

    I've been having problems with my PTO on my 345. The last time I mowed this summer I had to hold the switch up to keep it engaged. It would eventually stay engaged without holding the switch. Now the switch stays up but the PTO won't engage at all. Can I run jumpers to the PTO to see if the problem is the PTO or in the wiring before the PTO? Thanks in advance for your help.

  2. #2
    Join Date
    Nov 2012
    east coast
    deere,kubota,case,sears,new holland, Mf

    Default Re: 345 PTO won't engage

    I had a similar problem with my 325. Yes you can use jumpers. That is how I narrowed my problem down to being the actual circuit board itself. The board was like 80 bucks.

Similar Threads

  1. Fixed my 345 PTO bearing noise - DIY included
    By glader in forum John Deere Lawn & Garden
    Replies: 5
    Last Post: 12-02-2014, 09:45 PM
  2. 345 PTO Replacement
    By MarkCoburn in forum John Deere Lawn & Garden
    Replies: 4
    Last Post: 10-02-2012, 05:24 PM
  3. JD 345 PTO will not engage
    By PhilTros in forum John Deere Owning/Operating
    Replies: 1
    Last Post: 08-08-2012, 09:33 PM
  4. John Deere 345 pto clutch noise.
    By mooseman214 in forum John Deere Lawn & Garden
    Replies: 7
    Last Post: 08-14-2010, 04:29 PM
  5. PTO lever stuck and won't engage pto
    By joesaladino in forum Parts/Repairs
    Replies: 2
    Last Post: 08-04-2008, 11:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.