Page 1 of 3 123 LastLast
Results 1 to 10 of 28
  1. #1
    Elite Member J F's Avatar
    Join Date
    May 2012
    Posts
    4,174
    Location
    North of Atlanta, GA
    Tractor
    ShovelandBarrow

    Default Oil filter wrench for D130 mower?

    I just did the 8 hour lube/oil/filter change (not sure if the filter needed replacing, but I had the jd one from my old mower, so used it/same part #). I had to pound a screw driver through the filter to get it loosened (no filter wrench), and would like to avoid that for the next time.

    What are you guys using for this small filter? I can find something online, of course (amazon, etc), but figured I'd ask here first.

    Thanks.
    ____
    Jay

  2. #2
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,333
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Oil filter wrench for D130 mower?

    have yuo tried a strap wrench? I use on on oil filters from the big 2 quart ones down to the 8oz ones.. made from a seatbelt and a piece of square tube that a 1/2" drive socket fits into the end neatly.

    notch one end of the tube and slip the belt in doubled on itself.. slip end on filter.. and then wind like a ratchet strap.. I've never crushed a filter wit this setup.. and never had one NOT yeild either..

  3. #3
    Elite Member J F's Avatar
    Join Date
    May 2012
    Posts
    4,174
    Location
    North of Atlanta, GA
    Tractor
    ShovelandBarrow

    Default Re: Oil filter wrench for D130 mower?

    Thanks, but no, I havn't tried anything other than murderin' the filter with with "acupuncture", so far. I must have had a wrench for the old mower, but darned if I can remember it (maybe a post for the "how long have you looked for a tool" thread ).

    I don't mind getting a standard filter wrench (small size), just figured I check and see before I ordered one.
    ____
    Jay

  4. #4
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,333
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Oil filter wrench for D130 mower?

    make one..

  5. #5
    Elite Member J F's Avatar
    Join Date
    May 2012
    Posts
    4,174
    Location
    North of Atlanta, GA
    Tractor
    ShovelandBarrow

    Default Re: Oil filter wrench for D130 mower?

    Quit it. I want the quick, easy way out. By the way, I graduated from Seminole h.s. in Sanford, my mom and step-dad live in Deland.
    ____
    Jay

  6. #6
    Veteran Member sam5570's Avatar
    Join Date
    Jan 2012
    Posts
    1,320
    Location
    south west virginia
    Tractor
    new holland tn70

    Default Re: Oil filter wrench for D130 mower?

    if you want to buy a wrench istead of making one go to lowes and pick up the kobalt strap type filter wrench it adjust to different sizes works great.

  7. #7
    Elite Member J F's Avatar
    Join Date
    May 2012
    Posts
    4,174
    Location
    North of Atlanta, GA
    Tractor
    ShovelandBarrow

    Default Re: Oil filter wrench for D130 mower?

    Thanks, I'll probably order that or something similar online (I hate "real" shopping), ya just never know when something new under the sun might have come out...like the "easy" button.
    ____
    Jay

  8. #8
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,333
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Oil filter wrench for D130 mower?

    Quote Originally Posted by J F View Post
    Quit it. I want the quick, easy way out. By the way, I graduated from Seminole h.s. in Sanford, my mom and step-dad live in Deland.
    my MIL lives 25m north of deland. I drive thru there at least 1/month.

    I occasionly hit sanford too..

  9. #9
    Elite Member J F's Avatar
    Join Date
    May 2012
    Posts
    4,174
    Location
    North of Atlanta, GA
    Tractor
    ShovelandBarrow

    Default Re: Oil filter wrench for D130 mower?

    As always, a small world (especially with the interwebnet ).
    ____
    Jay

  10. #10
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,333
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Oil filter wrench for D130 mower?

    in fact.. monday I'm going to see the mIL.

    she's quite old and I have to go by every few weeks to take care of her house while the wife takes her out to lunch..e tc.

    occasionally they let me tag along if I have the yard chores done, all the lampos changed that are out.. etc..

    when we go over.. my wife brings a book to read and newspaper articles to talk to her mother about.

    I bring a ladder and work gloves..

Page 1 of 3 123 LastLast

Similar Threads

  1. 2210 Oil Filter Wrench
    By Swisher in forum John Deere Buying/Pricing
    Replies: 5
    Last Post: 10-27-2006, 11:00 PM
  2. Oil & Fuel Fuel filter wrench for filter locking ring
    By hpc in forum John Deere Owning/Operating
    Replies: 6
    Last Post: 03-28-2006, 03:31 PM
  3. Transmission filter wrench for TN
    By motorjock in forum New Holland Owning/Operating
    Replies: 2
    Last Post: 05-21-2005, 06:27 AM
  4. Filter wrench for large filters
    By DiskDoctr in forum Parts/Repairs
    Replies: 10
    Last Post: 08-18-2004, 08:50 AM
  5. Kubota Proprietary Filter Wrench?
    By HarleyBob in forum Kubota Owning/Operating
    Replies: 20
    Last Post: 11-14-2003, 07:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.