Results 1 to 8 of 8
  1. #1
    New Member
    Join Date
    Dec 2012
    Posts
    7
    Location
    ireland
    Tractor
    x495,2653a

    Default x495 serivce reset

    Hi all Ive looked up and down for this service reset button on my x495 ,
    I read through the owners manual and the maintenance manual but im still having trouble .
    most people say its a button inside the panel to left of the dash but i cant find it .
    Can anyone give me a gPS coordinate for it!
    Many thanks
    Al

  2. #2
    Platinum Member JDTank's Avatar
    Join Date
    Oct 2010
    Posts
    683

    Default Re: x495 serivce reset

    Quote Originally Posted by acamyo View Post
    Hi all Ive looked up and down for this service reset button on my x495 ,
    I read through the owners manual and the maintenance manual but im still having trouble .
    most people say its a button inside the panel to left of the dash but i cant find it .
    Can anyone give me a gPS coordinate for it!
    Many thanks
    Al
    There's a service light on the X495?

    The only light I know of is for the air filter restriction, in which case you simply press the button on the restriction gauge to reset it.

    I don't know a lot about the older X series machines, so I am sure there is a service light, I just have never heard of one of those on the X495.
    2012 John Deere X740
    #18 Steel cart.
    Front fender kit.
    Brush guard.
    SE seat.

  3. #3
    Super Star Member kennyd's Avatar
    Join Date
    Jul 2003
    Posts
    11,470
    Location
    Westminster, MD
    Tractor
    John Deere 4110

    Default Re: x495 serivce reset

    Yup, news to me...

    If by chance you are speaking of the flashing hourglass on the hour meter, then that is not a service indicator, its a "heartbeat" that's let's you know the machine is running and the hour meter is counting.
    John Deere 4110HST
    FEL, MMM, Artillian 42" Forks, I-Match, Ballast Box, #380 plow (modified to fit), Markham LD-48 Grapple, Trac-Vac 854 and lots of other STUFF.

    John Deere 4x2 Turf Gator

    View some of my projects/adventures in my Picasa Album

    Simple JDParts Tutorial HERE

  4. #4
    New Member
    Join Date
    Dec 2012
    Posts
    7
    Location
    ireland
    Tractor
    x495,2653a

    Default Re: x495 serivce reset

    Quote Originally Posted by kennyd View Post
    Yup, news to me...

    If by chance you are speaking of the flashing hourglass on the hour meter, then that is not a service indicator, its a "heartbeat" that's let's you know the machine is running and the hour meter is counting.
    No, its an amber light that has a book and spanner as the symbol and ill try and take a picture of it and attach it .
    Thanks for the replies so far
    Al

  5. #5
    Member
    Join Date
    Apr 2009
    Posts
    34
    Location
    wayland,ny
    Tractor
    jd 4510

    Default Re: x495 serivce reset

    on my x485 the button is on the left side light you said but it was hid behind a big wire loom. hope it helps.

  6. #6
    Elite Member
    Join Date
    Dec 2003
    Posts
    3,953
    Location
    NC
    Tractor
    Kubota Grand L3830

    Default Re: x495 serivce reset

    I have a X495 and went looking for the light. Could not find it. I talked to an individual who used to work at a deere House. He could provide no information on a light on a X495. He did say a light was on the X475 and to reset remove the left vent screen and look inside and about the middle you should see a orange button. He advise turn the key to the on position and press the orange button until the light on the dash starts blinking, or blinks three times. Remove finger from orange button, turn key off, then start and see if light went away. I hope I got what he said right.

  7. #7
    New Member
    Join Date
    Dec 2012
    Posts
    7
    Location
    ireland
    Tractor
    x495,2653a

    Default Re: x495 serivce reset

    Thanks Guys , Ill look again to see where it might be , i bought this machine second hand and its running ok .It has some work to be done this winter but another week or two here in ireland and it will be finished and i can get it ready for a full overhaul . It is strange that the light is not shown or talked much about on the manual. I really had a good look on the left hand side but could not see it at all .If i do ill tryout the service reset like you said and see what happens.

  8. #8
    New Member
    Join Date
    Dec 2012
    Posts
    7
    Location
    ireland
    Tractor
    x495,2653a

    Default Re: x495 serivce reset

    Found it!! last night , i didnt have any luck turning it off but it was there in behind the wiring loom sitting on a bracket. I tried to reset it but ill try gator6x4s info exactly and see if it starts blinking but all happy now until the next thing !

Similar Threads

  1. Does anyone know how to reset password on JDparts.com
    By Tx Jim in forum John Deere Ag Tractors
    Replies: 2
    Last Post: 08-05-2012, 03:33 PM
  2. Reset torque limiter?
    By Karl2 in forum John Deere Owning/Operating
    Replies: 5
    Last Post: 12-12-2009, 10:14 AM
  3. mail pointers being reset??
    By Soundguy in forum News/Feedback
    Replies: 3
    Last Post: 09-09-2008, 02:59 PM
  4. serivce for a IH 424 gas 2WD
    By slowrev in forum Case-IH
    Replies: 0
    Last Post: 09-05-2006, 03:56 PM
  5. Reset Computer
    By travelingman in forum Kubota Owning/Operating
    Replies: 1
    Last Post: 05-11-2005, 07:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.