Results 1 to 3 of 3
  1. #1
    Silver Member bam747's Avatar
    Join Date
    Nov 2004
    Posts
    200
    Location
    Palmer Divide in El Paso County, Colorado
    Tractor
    John Deere 4720 (2007)

    Default Installing JD forward lighting kit and rear work lights?

    Are these a simple bolt-on and plug-in installation?

    I know you have to buy the Light Brush Guard kit to install the front forward lighting kit.

    Does the original factory wiring harness already have plug-in pigtails for the forward lighting kit and two (right and left ROPS positions) rear work lights?

    At the top level of the configurator it seems to indicate that the forward lighting kit and the rear work lights are not compatible. However, if you bring up the detail page for the rear work lights, it shows both the forward lighting kit and at least a single rear work light installed at the same time. At this level, it seems to say that the forward lighting kit and the rear work lights are only incompatible on the 2305 and 3203 tractors.

    Am I correct in assuming that the forward lighting kit and the rear work lights ARE compatible on the 4x20 series tractors?
    Embrace The Technology!

    John Deere 4720 (2007), 400cx FEL, LandPride RBT3596 rear
    blade with 3-way hydraulic adjust.

  2. #2
    Elite Member
    Join Date
    Mar 2005
    Posts
    2,619
    Location
    Bedford, VA
    Tractor
    John Deere 2320

    Default Re: Installing JD forward lighting kit and rear work lights?

    From my experience with a 790 and a 2320 and rear work lights- the wiring harness will be there someplace and its as simple install (like you said bolt on and plug in)..

    good luck

    Brian
    Bedford, VA
    2320 w/ 62D MMM, 200CX FEL, Pats EZ Change, LX4 Cutter
    Co-owner (with my father) of John Deere 790, 30 HP, 4x4, 513 cutter, 70 FEL
    2012 Nissan Xterra Pro-4x

  3. #3
    Member
    Join Date
    Dec 2006
    Posts
    27
    Location
    middle arkansas
    Tractor
    4320 jd

    Default Re: Installing JD forward lighting kit and rear work lights?

    on my 4320 cab/400 x loader machine they were pre wired and easy to install

    simple bolt on and plug in switch

    2006 model

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.