Results 1 to 9 of 9
  1. #1
    Platinum Member tomd999's Avatar
    Join Date
    Jul 2007
    Posts
    640
    Location
    Viva Manchvegas!
    Tractor
    '10 3320 cab

    Default looking for a thread

    Hiya,

    Sorry to be a pain but there was a thread last week that had a link to someone that made a tilt and top setup for their 2320 or 2520 that had a 3 spool setup with 2 rear QC outlets. I tried searching for an hour to no avail, does anyone remember it and can point me to it?

    Thanks and sorry for the novice post,

    Tom

  2. #2
    Member DAN IN OHIO's Avatar
    Join Date
    Jun 2007
    Posts
    43
    Location
    Lexington, Ohio
    Tractor
    John Deere A, B, AR,50,70D,70D STD,2520

    Default Re: looking for a thread

    Tom, I have been looking for this thread too as I am interested in adding at least a 2 port Prince valve on the back of my 2520. I have looked in the hydraulic section above and found some useful info. The post I remember had pics and some good documentation but have not been able to find it either. I guess I will copy interesting posts to a folder on my hard drive for future reference since things seem to disapear.
    JD A, B, AR, 40T, 50, 60, 60std, 70D, 70D std, 70D, 80, 2520

  3. #3
    Platinum Member
    Join Date
    May 2007
    Posts
    655
    Location
    Thornburg, VA
    Tractor
    JD2305

    Default Re: looking for a thread

    I don't think it disappeared, you just haven't found it yet. I often see posts from as far back as 2003 on some google hits. Keep asking for it, I'll bet the author is still around, along with many who've read/posted on it.

  4. #4
    Veteran Member
    Join Date
    Sep 2003
    Posts
    1,228
    Location
    Hartselle, Alabama
    Tractor
    Deere 2520

    Default Re: looking for a thread

    It is in the Hydraulic section.
    JD 3320 LX5, KK rake and off brand box and rear blade. Millonzi grapple. Deere X495 for grass cutting.
    01 Ram 4x4 2500 CTD and 22' 12k trailer. Want a tiller and dump trailer.

  5. #5
    Platinum Member
    Join Date
    Jun 2006
    Posts
    784
    Location
    A Jersey Boy Exiled to MA
    Tractor
    John Deere 2520

    Default Re: looking for a thread

    Would it be my post?
    Thanks,

    Jeff

    JD 2520, 62D OnRamp MMM with MCS, 200CX Loader with 53" bucket and forks, RT1250 tiller, DR PTO Chipper/Shredder, iMatch/Pat's EZ Change, 46 BH, Top-N-Tilt

  6. #6
    Veteran Member
    Join Date
    Sep 2003
    Posts
    1,228
    Location
    Hartselle, Alabama
    Tractor
    Deere 2520

    Default Re: looking for a thread

    JD 3320 LX5, KK rake and off brand box and rear blade. Millonzi grapple. Deere X495 for grass cutting.
    01 Ram 4x4 2500 CTD and 22' 12k trailer. Want a tiller and dump trailer.

  7. #7
    Platinum Member tomd999's Avatar
    Join Date
    Jul 2007
    Posts
    640
    Location
    Viva Manchvegas!
    Tractor
    '10 3320 cab

    Default Re: looking for a thread

    Hiya,

    JC, you were correct, it was this one:

    http://www.tractorbynet.com/forums/h...highlight=2520

    Thanks,

    Tom

  8. #8
    Platinum Member
    Join Date
    Jun 2006
    Posts
    784
    Location
    A Jersey Boy Exiled to MA
    Tractor
    John Deere 2520

    Default Re: looking for a thread

    Sure, go for the guy with the pretty install, nice paint job and welder instead of my clumsy attempt at duct taping a valve to the back of the tractor
    Thanks,

    Jeff

    JD 2520, 62D OnRamp MMM with MCS, 200CX Loader with 53" bucket and forks, RT1250 tiller, DR PTO Chipper/Shredder, iMatch/Pat's EZ Change, 46 BH, Top-N-Tilt

  9. #9
    Member DAN IN OHIO's Avatar
    Join Date
    Jun 2007
    Posts
    43
    Location
    Lexington, Ohio
    Tractor
    John Deere A, B, AR,50,70D,70D STD,2520

    Default Re: looking for a thread

    Jeff and JC, Thanks for refreshing our memories. I had read both of your posts and found them more useful than the dealer supplied two hose rear outlets that connect to the FEL valve. Thanks again.

    Dan
    JD A, B, AR, 40T, 50, 60, 60std, 70D, 70D std, 70D, 80, 2520

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.