I have a JD359 blower mounted on the front of my JD 750 tractor. I noticed recently that the blower tends to push a lot of the snow in front of it rather then sucking it into the unit. The fan turns in the correct direction as it is pretty obvious. Is there a way that the auger could be incorrectly rotating. I had it apart this summer to do some bearing replacement. The auger turns from the top down and feeds the snow into the bottom of the unit. It seems to me the auger should be rotating the other way so snow is fed into the top of the unit and then pushed to the center. Currently the snow is picked up from the bottom. Would anyone who has such a setup confirm their direction of rotation. It's compared to having a broom where the auger is. The broom on my blower would sweep the dirt into the tractor versus away from. Hope that explains a bit of what I'm trying to ask. When I use to have a Kubota blower it would not leave a pile of snow where I stopped blowing. I tend to leave a pile of snow since it does not get sucked into the machine but pushed. Thanks