JD 2320 measurements

[2305JD]

Hi,

Could someone please give me the length of the JD 2320 with 200CX loader to the back of the 3PT arms.

Also the length of JD 2320 with a 60" box blade attached.

Thanks,

Mario

 

[EdC]

2305JD

It is right at 12 feet from the forward lip of the 53 inch bucket to the back of the 3 pt arms.

Don't have a box blade but it's 15 ft. 5 inches from the forward lip of the loader to the back end of my 60 inch scraper blade. i think the box blade is slightly larger.

If you add a tooth bar to the bucket add another 6 inches in the length.

Hope that helps.

 

[2305JD]

Thanks for the measurements.

I spoke to one of our fellow TBN members and he gave me measurement of 27" on the depth of a frontier Box Blade. Is it safe to assume that the 2320 with loader and Box Blade would total up to 14' 3".

Anyone???

 

[Rogator]

2305jd I just measured my 2520 with 200cx and boxblade and it is 14' 5". The 2520 is 3 tenths of an inch shorter than a 2320 according to john deere manuals.

 

[2305JD]

rogator,

when you measured 14' 5" was it hooked up with the imatch?

 

[Rogator]

rogator,

when you measured 14' 5" was it hooked up with the imatch?

yes it was

 

[ScottK]

Curious why you want to know? If it's just for storage, you can gain extra space by taking the bucket off then placing the loader arms over top of it. You can get anonther foot or more that way. If you want to know exacly how much, I can go measure it in the morning.

 

[2305JD]

ScottK,

I am looking at buying a new trailer because the 12' that I have now is too short. There is a 14' at a local trailer store that is a great deal but I dont want to buy too small. I could go to a 16', it just means more money.

thanks...