edjones72
Member
- Joined
- Oct 24, 2007
- Messages
- 48
- Location
- South Georgia
- Tractor
- Yanmar YM2210, Cub Cadet 2166, JD2940, Mustang 440 skidsteer
The 2940's lift will suddenly not go down. I then remove the control lever leaving just the float control and lift linkage exposed. With patience, I can move the lift and float linkage at the same time until they "interact" again. The lift will work again and I reconnect everything. A week goes by and the same thing happens while out harrowing. Any advice as to what is happening. I fear it is a linkage problem inside the rock shaft housing that will be beyond my repair capabilities.
Eric
Eric