Results 1 to 1 of 1
07-07-2011, 01:16 PM #1
- Join Date
- Jun 2005
- Western Washington
- John Deere/2720
JD 2720 3rd SCV and Rear Outlets
I installed the Power Beyond (LVB25603) and 3rd SCV (LVB25927) kits on my 2720. I didn't order the rear female couplers with the 3rd SCV. Has anyone installed the JD rear couplers? After researching the parts, I was only able to come up with a drawing for the 61H1068 adapter fitting. I am guessing that this adapter fitting replaces the the PB hose and is used to attach one of the female couplers. I have attached the drawing of the adapter. If this is the case, then I will have a female connector sticking out about 4 to 5 inches from the mounting bracket just waiting to get knocked off. You all know how stuff happens.
Does anyone have access to JD DTAC's? There is one associated with the rear outlets and 3rd SCV.
This is from the JD build your own for the 3rd SCV kit:
Requires LVB25603 Power Beyond Kit. If two female couplers
on the rear are desired the following parts are required;
two (LVA13231) 1/2 couplers, two (R26375) o-rings, an
(61H1068) adaptor fitting. For more information, refer to
the 2000 TWENTY Series Tractors hydraulic section of the sales manual and DTAC case #83678.
By 4440 in forum HydraulicsReplies: 9Last Post: 12-18-2012, 10:17 AM
By deere4320 in forum AttachmentsReplies: 18Last Post: 09-20-2012, 04:17 PM
By AKfish in forum John Deere Buying/PricingReplies: 40Last Post: 07-07-2011, 11:06 AM
By Old Man of the Mountain in forum HydraulicsReplies: 2Last Post: 03-09-2011, 08:23 PM
By jba3520 in forum John Deere Owning/OperatingReplies: 9Last Post: 09-11-2007, 09:01 PM