Results 1 to 10 of 13
-
07-13-2011, 09:07 PM #1New Member
- Join Date
- Jul 2011
- Posts
- 1
- Tractor
- John Deere
Rear hydraulic emplement want move!
I have a 5065E bought from a friend and he never used rear emplement just used fron loader to haul hay. Front bucket works fine rear emplement will not move from the up position! Any suggestion to try before removing rear casing to clean valve or replace it? Any suggestions would be much appreciated.
-
07-13-2011, 09:24 PM #2Super Member
- Join Date
- Jun 2009
- Posts
- 7,728
- Location
- Branson, Mo.
- Tractor
- Kioti DK35se Hydrostat
Re: Rear hydraulic emplement want move!
did you step on the lower link arms to put a little weight on them? or is there an actual implement on there? if so. and there is weight on the rear 3pt. then check the drop rate valve, usually located on the lower edge of the seat near the floorboards. Turn it counterclockwise to "loosen" the valve. If it is turned too far clockwise, it will not drop at all.
James K0UA
Kioti DK35se hydrostat with 2 QA buckets, 48 inch. King Kutter Rotary Cutter. Home-Brew 750 lbs ballast box. Loaded tires, Construction Attachments SSQA Lightweight Pallet forks. Satisfied Everlast PA160 welder owner
-
07-13-2011, 09:25 PM #3Elite Member
- Join Date
- Jul 2005
- Posts
- 3,943
- Location
- dsfasdf
- Tractor
- sdfadfa
Re: Rear hydraulic emplement want move!
Not 100% sure on your model but most tractors have a knob under the seat in the middle that controls the rate at which an implement lowers... it could be closed all the way. (one thing to check...)
Edit... got beaten to the punch line
TractorByNet.com, WAS next best thing to seat time - not any more.
-
07-13-2011, 09:28 PM #4Super Member
- Join Date
- Jun 2009
- Posts
- 7,728
- Location
- Branson, Mo.
- Tractor
- Kioti DK35se Hydrostat
Re: Rear hydraulic emplement want move!
teg, gotcha by one minute
James K0UA Kioti DK35se hydrostat with 2 QA buckets, 48 inch. King Kutter Rotary Cutter. Home-Brew 750 lbs ballast box. Loaded tires, Construction Attachments SSQA Lightweight Pallet forks. Satisfied Everlast PA160 welder owner
-
07-13-2011, 09:51 PM #5Elite Member
- Join Date
- Jul 2005
- Posts
- 3,943
- Location
- dsfasdf
- Tractor
- sdfadfa
Re: Rear hydraulic emplement want move!
IF I could type with two fingers, I might have had a chance
TractorByNet.com, WAS next best thing to seat time - not any more.
-
07-14-2011, 09:18 PM #6Super Member
- Join Date
- Jun 2009
- Posts
- 7,728
- Location
- Branson, Mo.
- Tractor
- Kioti DK35se Hydrostat
Re: Rear hydraulic emplement want move!
Originally Posted by teg
IF I could type with two fingers, I might have had a chance
You always wonder what happened to them.. did they try it? did that fix it.?
James K0UA Kioti DK35se hydrostat with 2 QA buckets, 48 inch. King Kutter Rotary Cutter. Home-Brew 750 lbs ballast box. Loaded tires, Construction Attachments SSQA Lightweight Pallet forks. Satisfied Everlast PA160 welder owner
-
07-14-2011, 11:31 PM #7Elite Member
- Join Date
- Jul 2005
- Posts
- 3,943
- Location
- dsfasdf
- Tractor
- sdfadfa
Re: Rear hydraulic emplement want move!
You mean one Post and they are gone!!! Plenty of those posts... must be playing with their tractor and don't have time for the computer that or maybe he forgot his password Originally Posted by k0ua
You always wonder what happened to them.. did they try it? did that fix it.?
James K0UA
and can't get back in to TBN to say Thanks! 
TractorByNet.com, WAS next best thing to seat time - not any more.
-
07-15-2011, 05:42 AM #8Veteran Member
- Join Date
- Dec 2008
- Posts
- 2,380
- Location
- NoCentral MN
- Tractor
- JD 3320 eHydro w/ 300CX Loader
Re: Rear hydraulic emplement want move!
Yep.....but that masked man left this here silver bullet. Originally Posted by teg
You mean one Post and they are gone!!! Plenty of those posts... must be playing with their tractor and don't have time for the computer that or maybe he forgot his password and can't get back in to TBN to say Thanks! 
3320 eHydro, 300CX Loader & 15 + great attachments
You gotta mine allot of dirt to find a diamond.
-
07-16-2011, 11:34 PM #9Super Member
- Join Date
- Jun 2009
- Posts
- 7,728
- Location
- Branson, Mo.
- Tractor
- Kioti DK35se Hydrostat
Re: Rear hydraulic emplement want move!
Yep, so far he is a 1 post pony
Hope he got his tractor fixed.
James K0UA Kioti DK35se hydrostat with 2 QA buckets, 48 inch. King Kutter Rotary Cutter. Home-Brew 750 lbs ballast box. Loaded tires, Construction Attachments SSQA Lightweight Pallet forks. Satisfied Everlast PA160 welder owner
-
07-17-2011, 07:02 AM #10Elite Member
- Join Date
- Jul 2005
- Posts
- 3,943
- Location
- dsfasdf
- Tractor
- sdfadfa
Re: Rear hydraulic emplement want move!
Good one!!! Is that your quote or is that a common phrase on forums? (I limit myself to just TBN... so I don't get around much Originally Posted by k0ua
)
TractorByNet.com, WAS next best thing to seat time - not any more.
Reply With QuoteSimilar Threads
-
Need Help Understanding Theory and usage of Valves on Rear Hydraulic Lift
By tjc1989 in forum HydraulicsReplies: 25Last Post: 08-28-2010, 06:59 PM -
Rear mounted sickle mower hydraulic lift
By rowlettr in forum HydraulicsReplies: 14Last Post: 07-10-2010, 10:54 AM -
BX24 leaking hydraulic fluid from rear cover
By Just2quickz28 in forum Kubota Owning/OperatingReplies: 4Last Post: 08-28-2008, 07:02 PM -
Need help want to install rear hydraulic valve on b21
By eurolap in forum HydraulicsReplies: 8Last Post: 12-02-2007, 03:37 PM -
Do I have a rear hydraulic outlet block?
By jdrotert in forum Kubota Owning/OperatingReplies: 25Last Post: 08-08-2001, 03:11 PM
