rear led work light on 2520

   / rear led work light on 2520 #1  

lowechj

Member
Joined
Dec 1, 2009
Messages
37
Location
Huntsville, ON Canada
Tractor
Kioti CK3510SE
Just installed a rear led work light ( 24 watt ) on my 2520, works quite well.
 

Attachments

  • DSC01743.jpg
    DSC01743.jpg
    284.4 KB · Views: 371
  • DSC01738.jpg
    DSC01738.jpg
    216.7 KB · Views: 485
  • DSC01742.jpg
    DSC01742.jpg
    270.9 KB · Views: 645
   / rear led work light on 2520 #2  
Just installed a rear led work light ( 24 watt ) on my 2520, works quite well.

That looks very nice.. Where did you purchase it, how much and was it easy to wire in?

Thanks
 
   / rear led work light on 2520 #3  
Do you have any idea as to how the light output compares to a standard 55 watt tractor light?
 
   / rear led work light on 2520 #4  
I bought two of the same one for my Case 1816. I had two of the round ones, and they worked well for a while. One blew out, and I decided to upgrade the front lights by using the square ones for the front, and moving the one good one to the rear.

I used them for plowing snow and they were great. My decision was based upon the very low current draw. The Case doesn't have a real alternator.
 
   / rear led work light on 2520
  • Thread Starter
#6  
Company is So Brite Lighting in Milton, ON. They come in round or square 18, 24 and 27 watts. Mine is the 24 watt, draws 2 amps and cost $70.00 cdn. My 2520 has 2 wires behind the rear seat that are for a rear light and go directly to the light switch so it was a case of putting two bullet connectors on the light and connecting it up. In the spring I might figure out to put one that would shine forward as I find the fel blocks the headlights when it is up.
 
 
Top