TBigLug
Bronze Member
I've got an old JD 401C with a 24" bucket that was missing a tooth when I bought it. All the teeth have been welded on (looks like a long time ago) so I'm sure I'll reweld the new one(s) on. Does anyone know which style of teeth these are? The bucket is so old and worn I can't tell which style they are. I do know originally they pinned on from the side. I'd like to stick with the flare teeth. Most of my digging is in sand so they work great.
Replacement Teeth from John*Deere
JD Original Line, CAT, H&L?
Second question, which model backhoe buckets are interchangeable with mine? For instance, can I put a 210, 310, 400, 410, 510, etc. backhoe bucket on mine? Or, if I was to rebuild my bucket, what thickness and type of metal would I use for the skin? 1/2", 3/4", 1", hot rolled plate, carbon sheet, etc.
Alro Metals Selection Guide - Carbon Plate/Sheet
Can someone measure their bucket, if they have one off the hoe, and give me the pin sizes, distance between the ears, center to center measurement on the holes on the bucket.
Thanks for your help.
Replacement Teeth from John*Deere
JD Original Line, CAT, H&L?
Second question, which model backhoe buckets are interchangeable with mine? For instance, can I put a 210, 310, 400, 410, 510, etc. backhoe bucket on mine? Or, if I was to rebuild my bucket, what thickness and type of metal would I use for the skin? 1/2", 3/4", 1", hot rolled plate, carbon sheet, etc.
Alro Metals Selection Guide - Carbon Plate/Sheet
Can someone measure their bucket, if they have one off the hoe, and give me the pin sizes, distance between the ears, center to center measurement on the holes on the bucket.
Thanks for your help.
