Results 1 to 2 of 2
  1. #1
    Bronze Member
    Join Date
    Dec 2006
    Posts
    71
    Location
    WNY
    Tractor
    JD 322, JD 4110

    Default Deere 4110 3-point hitch problem

    My 4110's 3-pt hitch lever is acting up. It had been binding, but with some effort, I could always get it to move the full range. Today, I looked at the level and it was a bit twisted. I straightened it, (aka bent it back) but now it moves to the highest position ok but will not go lower than "5". If you look at the attached picture, the photo on the left shows the lever while it is at the "8" position, and "pt A" shows a bolt head in a slot. In the photo on the right, I moved the the lever as far down as it will go and it interferes with the bolt head at "pt B". In a way, it seems like the bolt may be intended to be a stop for the lever. But since the bolt is on a slot, and is as far forward as it can be, I am thinking it something is not right. I could bend the lever to clear the bolt head, but that doesn't seem right either.

    Anyone have any thoughts? Thanks.
    Bob
    Attached Thumbnails Attached Thumbnails -4110-3pt-picture-jpg  

  2. #2
    Bronze Member
    Join Date
    Dec 2006
    Posts
    71
    Location
    WNY
    Tractor
    JD 322, JD 4110

    Default

    For what it's worth, I was able to bend the lever where the interference was and it appears to work.

Similar Threads

  1. 3-Point Hitch John Deere 7920 Three Point Hitch Problem
    By jacejackson14 in forum John Deere Owning/Operating
    Replies: 6
    Last Post: 07-15-2012, 12:36 AM
  2. 3 Point Hitch problem
    By EddieL in forum Mitsubishi/Satoh
    Replies: 4
    Last Post: 12-31-2011, 04:21 PM
  3. 3-Point Hitch 4110 3 point problem
    By Pipestone Kid in forum John Deere Owning/Operating
    Replies: 8
    Last Post: 04-28-2011, 09:34 PM
  4. 3-Point Hitch 4110 3-point hitch won't lower
    By Koby in forum John Deere Owning/Operating
    Replies: 8
    Last Post: 11-21-2007, 01:13 AM
  5. help with 3-point hitch problem
    By rsmith02184 in forum Parts/Repairs
    Replies: 7
    Last Post: 11-17-2005, 11:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.