KRH
Bronze Member
- Joined
- Mar 22, 2005
- Messages
- 80
- Location
- E\'ville, NY
- Tractor
- JD 5225 MFWD w Power Reverser; 2010 JD 110 tlb; 2007 JD 4520
Hi All:
My brother has a 4600 and the fuel cutoff solenoid doesn't work after a number of starts. If you let it sit awhile, it will start. I have taken the solenoid out and laid in on the frame. It will pull the plunger in a few times, but then will stop. If you push the plunger in, it will stay. So obviously the thermistor is working as it "holds" the plunger in. Does the "pull" function also run through the thermistor? It acts like the "pull" function won't work after something heats up?
Thanks.
KRH
My brother has a 4600 and the fuel cutoff solenoid doesn't work after a number of starts. If you let it sit awhile, it will start. I have taken the solenoid out and laid in on the frame. It will pull the plunger in a few times, but then will stop. If you push the plunger in, it will stay. So obviously the thermistor is working as it "holds" the plunger in. Does the "pull" function also run through the thermistor? It acts like the "pull" function won't work after something heats up?
Thanks.
KRH