chickenman
Gold Member
- Joined
- Apr 6, 2004
- Messages
- 415
on the side of the plastic stearing wheel quadrant i drilled a 1 1/2" hole on either side and plugged them with faucet hole plugs.
now when i have the wheel sticking i remove the plugs and blow the dirt and dust out with an airhose.
one thing i learned is DONT USE OIL
i replaced the tilt mech myself
it is one sorry piece of engineering
i dont recomend that you pull yourself up by the stearing wheel or squirt oil into it.
now when i have the wheel sticking i remove the plugs and blow the dirt and dust out with an airhose.
one thing i learned is DONT USE OIL
i replaced the tilt mech myself
it is one sorry piece of engineering
i dont recomend that you pull yourself up by the stearing wheel or squirt oil into it.