Results 1 to 2 of 2
  1. #1

    Join Date
    Sep 2005

    Default Mid Mount mower question.

    I'd like to add a MMM to my JD4400. I know I'll need to add
    the MM PTO kit but don't know what hydraulics are needed.
    Could someone help me out with the basics needed to hook up a mid mount mower? Do I need to add a Single SVC kit and is 1 remote enough?

    Thanks for the advice,

  2. #2
    Gold Member
    Join Date
    Jun 2003

    Default Re: Mid Mount mower question.

    You will need the Third Selective Control Valve kit, the valve, the cylinder, and two 3/8" hydraulic hoses/ The kit puts the outlets on the right rear fender so the (2) 3/8" hoses snake down to the cylinder.
    In order to mount the Third Valve kit you need to have the Dual Valve to tun the loader already on it. If you don't have loader controls yet you'll have to add those first to go this route.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2014 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.