Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2005

    Default Edge material for Front end Loader Bucket

    What is the best way to use the bucket to move snow on a paved driveway without damging the asphalt??
    Can I put a poly/plastic edge on the bucket to help prevent damage. I have looked at United States Plastic Corp. which sells 1/2 x 6" rectangular strips cut to proper lengths.
    Would this be a good suggestion. How would I attacch to the bucket.

  2. #2
    Platinum Member EquipmentJunkie's Avatar
    Join Date
    Oct 2003
    SE PA
    Ford 1520

    Default Re: Edge material for Front end Loader Bucket

    I would drill holes in the bucket edge like you would be installing a bolt-on cutting edge...which you are, sort of.

    Don't be surprized if the plastic does not wear very long. You may also wish to contact May-Wes Manufacturing. web page They build all sorts of plastic parts for the ag industry including plastic cutting edge. It is pre-beveled and they will predrill holes for you. It isn't cheap but should work well.

  3. #3
    Elite Member RalphVa's Avatar
    Join Date
    Dec 2003
    Charlottesville, VA, USA
    JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R

    Default Re: Edge material for Front end Loader Bucket

    I bought some 1/2" heater hose and have put a slit piece on the bottom of my back blade. I plan to put a piece along the bucket as well. Have tacked it here and there with Goop to hold it in place. Will let you know how it works.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.