jrschremser
Member
Although I have spent nearly my whole adult life around green and yellow equipment I still find hours of enjoyment and learning on this site. I am nearing retirement so I am gearing up some of my equipment. I have a 1999 model 4600 power reverser with a 460 loader. I am sold on a Fasse or WR Long electric diverter valve to operate a grapple. I want to hook up a log splitter and a TnT for the box blade.
Does the power beyond kit for the splitter disable the 3PH?
Can I run hydraulics from the PB circuit out to the 3rd and 4th SCV's for the TnT and just disconnect these lines when they are not in use?
If so my plan is to mount these valves as low profile as possible and avoid running excess hose to get snagged. John Deere has what looks to be the ultimate set up with a diverter that runs off the mid mount dual SCV out to rear SCV's on the current 4000 series. Unfortunately this system isn't compatible with the 4600.
Does the power beyond kit for the splitter disable the 3PH?
Can I run hydraulics from the PB circuit out to the 3rd and 4th SCV's for the TnT and just disconnect these lines when they are not in use?
If so my plan is to mount these valves as low profile as possible and avoid running excess hose to get snagged. John Deere has what looks to be the ultimate set up with a diverter that runs off the mid mount dual SCV out to rear SCV's on the current 4000 series. Unfortunately this system isn't compatible with the 4600.