John deere 2010 industrial loader
I recently purchased this unit, and have a couple questions ;
-Where can I find service manual info that can be downloaded ?
-Have a problem with 3 point hitch function, was working fine...and now nothing ? Where does one check fluid level
-unit is equipped with hyd. pump where normal pto would be, is it possible to hake some changes, for example from a green ag. 2010 and add a pto ?
These are old school questions , I appreciate any input !!
Thanks
Lightfoot
Re: John deere 2010 industrial loader
Re: John deere 2010 industrial loader
IIRC the hyd check plug on a 2010 is by right heel sitting in the seat. JD didn't offer a pto hyd pump. Oil level is full when oil is is touching the threads. No service manual for free download but a SM is available on CD-ROM for about $40
Re: John deere 2010 industrial loader
Quote:
Originally Posted by
Tx Jim
IIRC the hyd check plug on a 2010 is by right heel sitting in the seat. JD didn't offer a pto hyd pump. Oil level is full when oil is is touching the threads. No service manual for free download but a SM is available on CD-ROM for about $40
Thanks for the response...
With reference to CD Rom, a little more info as to where it might be located would be helpful.
As for the pto change over, is it possible to change some rear axle components from an Ag. 2010 and convert the unit, perhaps operate the hyd. pump from an alternative location, on the front of the engine for example ?
Re: John deere 2010 industrial loader
Originally Posted by Tx Jim
IIRC the hyd check plug on a 2010 is by right heel sitting in the seat. JD didn't offer a pto hyd pump. Oil level is full when oil is is touching the threads. No service manual for free download but a SM is available on CD-ROM for about $40
Thanks for the response...
With reference to CD Rom, a little more info as to where it might be located would be helpful.
As for the pto change over, is it possible to change some rear axle components from an Ag. 2010 and convert the unit, perhaps operate the hyd. pump from an alternative location, on the front of the engine for example ?
Re: John deere 2010 industrial loader
John Deere Bookstore Help Desk and Production Center 866-213-3373 or 414-466-6060
OMT19256 ( OPERATORS MANUALS ) English
CONSTRUCTION
CRAWLERS
Model Series Serial
2010 Series 042001–
Purchase:
Price (USD): $31.86
SM2036 ( SERVICE MANUALS ) English
CONSTRUCTION
TRACTORS
Model Series Serial
2000 Series Wheel Tractors (Gas / Diesel)
2010 Series Wheel Tractors (Gas / Diesel)
Purchase:
Price (USD): $102.06
Re: John deere 2010 industrial loader
Hi Tx Jim, my distributor rotor broke on my JD300 and it is stuck in my neighbor's driveway...is there any way to get one locally at Autozone? They do not have a cross reference for it.
I found this info
John Deere Ignition Rotor 300; 300 SERIES; 300B LOADER; 301; 302; 302A; 310; 350 CRAWLER; 350B CRAWLER; 380 LIFT TRUCK; 400; 401; 401B LOADER; 401C LOADER; 410 LOADER; 440 SKIDDER; 440A SKIDDER; 440B SKIDDER; 450; 480; 1010; 1020; 1520; 2010; 2020;
$8.13
Re: John deere 2010 industrial loader
This is the JD part # AT14680
PART NO: TPAT14680. Rotor. Replaces Prestolite IBT1016
Re: John deere 2010 industrial loader
Thanks Jim...you are excellent...Happy New Year.;):applause:
Quote:
Originally Posted by
Tx Jim
This is the JD part # AT14680
PART NO: TPAT14680. Rotor. Replaces Prestolite IBT1016