Page 4 of 6 FirstFirst 123456 LastLast
Results 31 to 40 of 55
  1. #31
    Member
    Join Date
    Apr 2013
    Posts
    30
    Location
    Laplace la
    Tractor
    John deere 820 German and two farmall super av

    Default Re: John deere 820

    I'm sorry it didn't engage with engine not running

  2. #32
    Member
    Join Date
    Apr 2013
    Posts
    30
    Location
    Laplace la
    Tractor
    John deere 820 German and two farmall super av

    Default Re: John deere 820

    I got some info on the tractor. A new clutch was installed about a year and a half ago. Could it be just a adjustment? Besides this issue everything works fine. Although this issue makes it useless to me being that I bought it to bush hog with.

  3. #33
    Elite Member Tx Jim's Avatar
    Join Date
    Jan 2007
    Posts
    3,718
    Location
    Coyote Flats,Tx
    Tractor
    JD 4255/Kubota M7040 HDC

    Default Re: John deere 820

    Sounds as if the pto clutch is stuck. Attach a pasture mower engage pto then start engine,get mower up to speed then depress clutch pedal and stop engine to see if clutch will free up.

  4. #34
    Member
    Join Date
    Apr 2013
    Posts
    30
    Location
    Laplace la
    Tractor
    John deere 820 German and two farmall super av

    Default Re: John deere 820

    It has a 6ft finishing mower on it. I can't get the pto to engage with the engine off. It seems like the petal isn't going to the second stage.

  5. #35
    Veteran Member
    Join Date
    Apr 2004
    Posts
    1,894
    Location
    East Coast of Lake Huron
    Tractor
    Deere, several

    Default Re: John deere 820

    The clutches have to be setup as per the service manual. If Bubba and Billy Bob along with a 24 of beer tried to do a clutch job. A pto clutch that won't engage or won't disengage is the usual outcome.

  6. #36
    Elite Member Tx Jim's Avatar
    Join Date
    Jan 2007
    Posts
    3,718
    Location
    Coyote Flats,Tx
    Tractor
    JD 4255/Kubota M7040 HDC

    Default Re: John deere 820

    If pto won't engage with engine not running then I highly suspect a bad shift collar on pto shaft

  7. #37
    Member
    Join Date
    Apr 2013
    Posts
    30
    Location
    Laplace la
    Tractor
    John deere 820 German and two farmall super av

    Default Re: John deere 820

    Well I adjusted clutch rod and it works perfect. Even cut grass with it. Now just have to figure out the miss that it has. I'm thinking bad injector. When it's idling and crack open num 2 there is not much change. Fuel pump leaks got one on order at napa. Thanks everyone for the help everyone.

  8. #38
    Member
    Join Date
    Apr 2013
    Posts
    30
    Location
    Laplace la
    Tractor
    John deere 820 German and two farmall super av

    Default Re: John deere 820

    Has anyone ever had to or had problems with the injectors on these tractors?

  9. #39
    Elite Member Tx Jim's Avatar
    Join Date
    Jan 2007
    Posts
    3,718
    Location
    Coyote Flats,Tx
    Tractor
    JD 4255/Kubota M7040 HDC

    Default Re: John deere 820

    Here's what a new injector cost from A&I A-AR89564 INJECTOR, PENCIL ADD 59.84 USD

  10. #40
    Member
    Join Date
    Apr 2013
    Posts
    30
    Location
    Laplace la
    Tractor
    John deere 820 German and two farmall super av

    Default Re: John deere 820

    Ok. Thanks for the help. I will keep y'all posted. Once the miss is gone she will be ready to go.

Page 4 of 6 FirstFirst 123456 LastLast

Similar Threads

  1. Replies: 10
    Last Post: 07-03-2012, 04:33 PM
  2. John Deere 950 with cab
    By wilsonfam in forum Private Party Ads
    Replies: 0
    Last Post: 11-11-2011, 07:23 AM
  3. john deere 755 pto
    By bohaslup123 in forum Hydraulics
    Replies: 6
    Last Post: 07-01-2011, 02:08 PM
  4. JOHN DEERE 650 DIESEL TRACTOR W/JOHN DEERE 272 GROOMING DECK*RUNS GOOD
    By mr.haney in forum Private Party Ads Archive
    Replies: 0
    Last Post: 10-25-2010, 01:15 PM
  5. John Deere 790 and John Deere MX5 Will it Work?
    By TerryWorkman in forum John Deere Owning/Operating
    Replies: 5
    Last Post: 02-13-2005, 03:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.