Kioti vs BobCat loaders ?

[Slackdaddy]

Looking at the pics the bobcat CT120 has a 6TL loader and the CT230 has a 7TL loader
Rhino 6TL = 600lb lift capacity at full height
Rhino 7TL = 1035lb " " "

The kioti loaders:
KL120 (CK20) = 1074lb at max height (at pins)
KL130 (CK30) = 1155lb " " " "

A little difference on the 30HP rigs, but the 20 hp machines have a major differance.

Slack

[crabjoe]

Not sure where you're getting the 600lb number from, but on BOBCAT's site, they have a different number.

Compact Tractor Implements Attachments - Bobcat Company

Lift capacity (height 73.5 in) – 500 mm in front of
bucket pin (with proper rear
ballast and rated tires) : 830lbs

The 7TL shows 1225lbs.

[Slackdaddy]

Rhino specs

6TL = 2406

7TL = 2407TL

[IslandTractor]

The difference may be due to specs at pivot pin vs mid bucket so both numbers could be correct.

[crabjoe]

The difference may be due to specs at pivot pin vs mid bucket so both numbers could be correct.

Ed,

Wouldn't 500mm put it about the mid bucket?

Then again.. I'm thinking 600lbs on Rhino's site might not be tractor specific.

[IslandTractor]

Ed,

Wouldn't 500mm put it about the mid bucket?

Then again.. I'm thinking 600lbs on Rhino's site might not be tractor specific.

Yes, 500mm is essentially the same as mid bucket. I wasn't looking closely enough to see that.