JUst about ready to pull the trigger on a CK30....except

[dfkrug]

There are pros and cons to each machine. Since I now have both, I have
published some measurements here:

http://www.tractorbynet.com/forums/b...ck30-side.html

The lift performance between these 2 FELS should be similar, assuming you
properly set the pressures to spec.

Also note that the new KL130 quick-attach bkt maintains the close 5.5" pin
spacing as the pin-on bucket. That's much smaller than Bobcat's 8".

[TBDonnelly]

Originally Posted by KiotiDave

Yota,
Here are a couple pictures a customer sent to me (not re-touched)of his KL130 loader at work.
Keep in mind that his tires are loaded and he has a backhoe on the rear.
This stump and log are maple and still green. As you can see, the KL130 is able to lift well over it's printed capacity.
KiotiDave

The only problem I see is getting through the woods and then through the gate.

Don