twigpig
Silver Member
I am replacing the seals in the bevel gear case on the left front axle on my Kioti CK30. It leaks. I have to invest in a set of good snap ring pliers. See post in Parts/Repairs forum. I am cruising along pretty good until I get to the final part I have to take apart. It is called the "housing" in the service and parts manual. Part number T2185-43471. It has a burr on the inside like someone has tried to pry it out before. I looked at the O ring that fits into it but I can't see any damage. I have a new housing O rings and seals. Thank you Wallace Tractor. The housing is a machined metal ring that looks like it is just pressed in. I would have to press on the bearing from the inside in order to push it out from behind. I don't think that is a good idea. I was wondering if there is a trick or tool to use to pry it out from the top? Flathead screwdriver? Has anybody taken one of these out? I labeled the housing in red in the first photo. I included the other photo so you can get an idea of what part I am working on.