Geoscouter
New member
I recently purchased a 1999 LB1914 with loader(Buhler-Allied), Rear finish mower and rear blade. It has 302 hours. Still learning how to operate it but seems fairly straightforward. The only problem encountered so far is the High / Low gear range lever is very hard to move. Is there any way to lossen up this control? Also, in the manual it refers to a Fuel Thermistor on the control panel ..looks like an idiot light. What is a fuel Thermistor?
In looking at the Sevice Interval chart in the Maintenance section of the manual I'm a little confused. It lists hours and Date to perform the service. For example in one row
Hours Date Replacement Perform
First 50 6 months Engine Oil and Filter Grease, Inspect Fluid levels etc
Transmission Oil and Filter
Does this mean to do it either at 50 hours of operation or 6 months whichever comes first? The reason I ask is that further down on the chart there is a section called Low Usage. The row in question is:
Hours Date Replacement Perform
Low 300 2 years Transmission Oil Adjust valve lash (Contact Dealer)
Usage and filter cleaning
Front axle gear oil
What is Adjust Valve lash? Since this tractor has just reached 300 hours but is 8 years old should I assume that it was done by the previous owner. I bought from the second owner who had it only 2 years. Can I do this myself or is there a way to tell if it has been done. Does it have to be done every 300 hours of operation?
Sorry for all of the questions but would appreciate any feedback. Like many I've been reading this forum for many years but am just now posting. I'ts been a real education for this city boy who now has some rural property and now a tractor.
In looking at the Sevice Interval chart in the Maintenance section of the manual I'm a little confused. It lists hours and Date to perform the service. For example in one row
Hours Date Replacement Perform
First 50 6 months Engine Oil and Filter Grease, Inspect Fluid levels etc
Transmission Oil and Filter
Does this mean to do it either at 50 hours of operation or 6 months whichever comes first? The reason I ask is that further down on the chart there is a section called Low Usage. The row in question is:
Hours Date Replacement Perform
Low 300 2 years Transmission Oil Adjust valve lash (Contact Dealer)
Usage and filter cleaning
Front axle gear oil
What is Adjust Valve lash? Since this tractor has just reached 300 hours but is 8 years old should I assume that it was done by the previous owner. I bought from the second owner who had it only 2 years. Can I do this myself or is there a way to tell if it has been done. Does it have to be done every 300 hours of operation?
Sorry for all of the questions but would appreciate any feedback. Like many I've been reading this forum for many years but am just now posting. I'ts been a real education for this city boy who now has some rural property and now a tractor.