Results 1 to 4 of 4
  1. #1

    Default CK 25, shuttle shift--getting stuck in reverse

    2005 tractor with 250 hours. started happening about 50 hours ago. have adjusted the linkages several times. usually does it when in 4 wheel drive. have to rev up the motor and dump the clutch several times in order for it to slip out of reverse. then it will shift fine for a while, sometimes for days before it does it again. fluid level is fine and clutch is correctly adjusted. please help. thanks.

  2. #2
    Platinum Member
    Join Date
    Oct 2005
    Posts
    549
    Location
    Carroll County, Ohio
    Tractor
    Kioti CK30 HST

    Default Re: CK 25, shuttle shift--getting stuck in reverse

    Does the shuttle lever move out of reverse but the tranny isn't shifting? Or will the shuttle lever itself not easily move out of the reverse position? If it's the latter, try pressing the brake pedal pretty stiff as you depress the clutch, then slide the shuttle lever out of the reverse position. My kubota shuttle shift I used to have would sometimes get picky about going INTO reverse. Using the brake as I disengaged the clutch seemed to help alot.
    Kioti CK30 HST - KL130 FEL + Toothbar - 84" Rhino LR500 RB - Woods RD6000 - Ford PHD

  3. #3

    Default Re: CK 25, shuttle shift--getting stuck in reverse

    It is getting the lever out of reverse. I will give the brake a try. Thanks

  4. #4

    Default Re: CK 25, shuttle shift--getting stuck in reverse

    so what was the resolution?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.