markwmo
Member
I'm looking to buy either a 4' or 5' box blade. Would a CK20 or Bobcat CT120 handle a 5' box blade or would I be better off with a 4'?
Grading Box blade size
- Thread starter markwmo
- Start date
deputyrpa
Gold Member
Well, I used a 6' box blade with my ~3000# Jinma 284. I'm not familiar with the weight of the CK20. Depends on what you will use it for and how fast you want to do it. I struggled with heavy clay in wet conditions, but had no problem with anything else.
As the BB was considerably wider than the Jinma, I was able to grade to the side without driving over it first. That kept the tractor level and therefore the BB too. At least the BB should cover your tractor width.
Now I use the BB on my DK45, and it's almost toyish, but I can still bury it enough to make the DK work. Hope that helps.
As the BB was considerably wider than the Jinma, I was able to grade to the side without driving over it first. That kept the tractor level and therefore the BB too. At least the BB should cover your tractor width.
Now I use the BB on my DK45, and it's almost toyish, but I can still bury it enough to make the DK work. Hope that helps.
PILOON
Super Star Member
I run 5ft behind a 20 HP mitsubishi with no problems.
For sure you want wider than your wheels.
For sure you want wider than your wheels.
IslandTractor
Super Star Member
- Joined
- Sep 15, 2005
- Messages
- 17,101
- Location
- Prudence Island, RI
- Tractor
- 2007 Kioti DK40se HST, Woods BH
People seem to run 5ft box blades on CK20s with no problem. A few guys have 4ft BBs but I don't think any of them moved down from a 5 footer for performance reasons. That said, I can stall my 40hp tractor with a 6ft BB so it depends on how you use it.