Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    New Member
    Join Date
    Apr 2008
    Posts
    20

    Default 3pt Woods backhoe

    The question I have is a Woods 650 3pt backhoe something I want to look at to put on a CK20hst. Price is $750.00 and from the pic I saw it does not look to be in bad shape. It has a pto driven hydraulic pump so I would guess it's own oil tank.

  2. #2
    Platinum Member rimshot's Avatar
    Join Date
    Jan 2008
    Posts
    598
    Location
    Michigan
    Tractor
    Kioti CK20 (S) HST

    Default Re: 3pt Woods backhoe

    It's going to be hard to beat that $750 for a three point backhoe especially when you consider a new Kioti 2465 would run close to $6000.00 with a subframe. If the Woods backhoe can be purchased for that I'll bet you could buy the thing and trade it in for a new one if you reall want a good hoe. Then too, if this thing adapts and runs to suit your needs it could be all you need.

    rimshot
    CK20(s) HST , snow blower, hoe, FEL

  3. #3
    Veteran Member
    Join Date
    Feb 2005
    Posts
    1,773

    Default Re: 3pt Woods backhoe

    Sounds like a great deal I would buy in in a heartbeat If it has the PTO pump thats a bonus and they alone are worth allot. It should have a tank right behind the seat.They were well constructed backhoes.Just be watchful for leaks and cracks. for this price cracks might not be to bad, You can repair most ..Good luck and pictures if you get em.

  4. #4
    Veteran Member
    Join Date
    Mar 2005
    Posts
    1,433
    Location
    Erie, Pennsylvania
    Tractor
    Kioti CK30HST

    Default Re: 3pt Woods backhoe

    Sounds like a good price even if you have to do some minor repairs. Rimshot mentioned that it is a 3pt attach bh. From what I have heard, a 3pt bh can be a little tough on the tractor 3pt mounts. I'm sure someone with better experience or knowledge can advise. I know my frame mounted KB2375 can move my CK30hst around if I do some tougher digging.

  5. #5
    Silver Member
    Join Date
    Feb 2006
    Posts
    164

    Default Re: 3pt Woods backhoe

    On page 3-5 of my CK20 manual where it lists implement sizes it says ( Do not use 3 point hitch backhoe). As much as this machine moves around with a sub-frame mount I think a 3 point mount would would break the tractor.

  6. #6
    New Member
    Join Date
    Apr 2008
    Posts
    20

    Default Re: 3pt Woods backhoe

    Thank you for the replies guys, at this point I might not even end up with it as I can't get in touch with the owner. It's on Craigs list and my track record is not very good on that site.

    My thoughts were that for the price if it was'nt beat to death I could make it into a subframe mount, does that sound possiable.

    My older brother was a welding insructor for General Dynamics when I was a kid and he tried to pass on a little knowledge. Not that I always listened to him lol, but I think I'm capable.

  7. #7
    Elite Member jimmyj's Avatar
    Join Date
    Aug 2007
    Posts
    3,783
    Location
    Ontario Canada
    Tractor
    Allis Chalmers 616 (Two) and a Kioti CK30 HST with loader and backhoe

    Default Re: 3pt Woods backhoe

    It almost sounds too cheap. My manual says not to use a 3ph BH either, maybe check with your dealer.

    If it is that price, heck, it's a deal.
    God Bless our brave men, bring them home, safe again.

  8. #8
    Veteran Member
    Approved Advertiser
    wallace's Avatar
    Join Date
    Feb 2004
    Posts
    2,950
    Location
    PA.
    Tractor
    MAHINDRA

    Default Re: 3pt Woods backhoe

    You can buy a subframe from Woods that will mount it to the CK20
    Wallace Tractor and Equipment
    www.wallacetractorandequipment.com
    rwallacetractor@echoes.net
    RICK WALLACE

    (570) 689-7494


    We're not just a tractor store anymore!

  9. #9
    New Member
    Join Date
    Apr 2008
    Posts
    20

    Default Re: 3pt Woods backhoe

    Quote Originally Posted by wallace View Post
    You can buy a subframe from Woods that will mount it to the CK20
    How much would one cost, it would be easier than making one. Would you recomend this backhoe for a CK20hst if it is decent condition. It's not going to used on a regular basis and if I can save a buck here, it' money I spend on other attachments.

    Thanks Steve.

  10. #10
    Veteran Member
    Approved Advertiser
    wallace's Avatar
    Join Date
    Feb 2004
    Posts
    2,950
    Location
    PA.
    Tractor
    MAHINDRA

    Default Re: 3pt Woods backhoe

    That backhoe is no problem for the CK20 as long as it is subframe mounted.
    The mount is a 4 point subframe and it list out for $1,700
    I have one here I will sell it for $1,500
    Wallace Tractor and Equipment
    www.wallacetractorandequipment.com
    rwallacetractor@echoes.net
    RICK WALLACE

    (570) 689-7494


    We're not just a tractor store anymore!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.