Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Sep 2008
    Posts
    38
    Location
    c,square newyork
    Tractor
    belarus 562

    Default Front wheel bolt torq ck30

    I was reading through the manual,and on page 10-13 says 50.6 fps for the rear and 290.7 fps for the front.Is this a misprint for the front ,its gotta be because you would snap the stud off at 290.7.Is it 29?

  2. #2
    Silver Member LaVoie Equipment's Avatar
    Join Date
    Apr 2010
    Posts
    168
    Location
    Ashland, VA
    Tractor
    KIOTI

    Default Re: Front wheel bolt torq ck30

    Kodiak:

    I went and did a little research; looks like it is a huge misprint. On page 1-16 of the Workshop Manual dated June 2008, your front wheel bolts should be 50.6 lb-ft/68.6 Nm and your rear wheel bolts should be 209.7 lb-ft/284 Nm.

    Never saw that before. I will tell our tech/service people at KIOTI and get it resolved.

    Tony
    Tony LaVoie
    J A LaVoie Equipment Sales, Inc.

  3. #3
    Veteran Member
    Join Date
    Mar 2005
    Posts
    1,433
    Location
    Erie, Pennsylvania
    Tractor
    Kioti CK30HST

    Default Re: Front wheel bolt torq ck30

    Quote Originally Posted by LaVoie Equipment View Post
    Kodiak:

    I went and did a little research; looks like it is a huge misprint. On page 1-16 of the Workshop Manual dated June 2008, your front wheel bolts should be 50.6 lb-ft/68.6 Nm and your rear wheel bolts should be 209.7 lb-ft/284 Nm.

    Never saw that before. I will tell our tech/service people at KIOTI and get it resolved.

    Tony
    The owners manual for my 2004 CK30hst, purchased in 04/05, is also incorrect. It has the rears at 290.7 lbs. Members have discussed this in the past years. They call it Korenglish or something like that. One member, who is not on this site anymore, was helping for a while to rewrite the books in correct english but Kioti doesn't seem to worry about it much. The poor english isn't to hard to get around but when the spec numbers are misprinted, that could cause a problem.

  4. #4
    Member
    Join Date
    Sep 2008
    Posts
    38
    Location
    c,square newyork
    Tractor
    belarus 562

    Default Re: Front wheel bolt torq ck30

    Thanks for the replys,i guess i'll do them like i do the truck lugnuts

  5. #5
    Veteran Member
    Join Date
    Aug 2007
    Posts
    1,260
    Location
    Mid-Coast Maine

    Default Re: Front wheel bolt torq ck30

    Is the 209 ft-lbs for the rears correct?? I thought somebody here posted that they tried to tighten the rears to that torque and broke studs.
    Jim

    - '01 Husqvarna W4814- 48" walk behind lawn mower.
    - '04 John Deere Z-Trac 727A- 54" ZTR
    - '13 Kioti DK40 HST - KL401 loader, DK40 72" QA bucket, LK3054 60" QA bucket, toothbar for 60" bucket, dual rear remotes, 7ft 6 way rear blade, 78" ETA Box Blade, Woods BH-90x backhoe, loaded rear tires, Kioti Canopy.

  6. #6
    Silver Member
    Join Date
    Feb 2006
    Posts
    164

    Default Re: Front wheel bolt torq ck30

    My CK20 manual says 160 lbs ft for the rears. Couldn't find a torqe spec for the fronts, but I would imagine if you found a torqe table for that size bolt it would be pretty close.

  7. #7
    Elite Member dfkrug's Avatar
    Join Date
    Feb 2004
    Posts
    4,354
    Location
    NorCal
    Tractor
    05 Kioti CK30HST w/ Prairie Dog backhoe

    Default Re: Front wheel bolt torq ck30

    Quote Originally Posted by VictorW View Post
    The owners manual for my 2004 CK30hst, purchased in 04/05, is also incorrect. It has the rears at 290.7 lbs. Members have discussed this in the past years. They call it Korenglish or something like that. One member, who is not on this site anymore, was helping for a while to rewrite the books in correct english but Kioti doesn't seem to worry about it much. The poor english isn't to hard to get around but when the spec numbers are misprinted, that could cause a problem.
    Yeah, you speak of KiotiJohn. He was very helpful.

    My OM is dated 11-2004, and has a section on pg 8-3 that states only one
    spec: 67 N-m (50 ft-lb). No mention of front or rear.

    In my service manual (DEC 2004), page 1-20, it states 50.6 ft-lb for the
    front and 209.7 for the rear.
    See my TBN projects at:
    http://mysite.verizon.net/resyfcgt/

Similar Threads

  1. Replies: 25
    Last Post: 06-14-2012, 09:02 AM
  2. Farmtrac 270 need front wheel
    By Ryan03 in forum Farmtrac
    Replies: 5
    Last Post: 08-15-2008, 04:33 PM
  3. Front Wheel Removal
    By RobA in forum Owning/Operating
    Replies: 8
    Last Post: 11-25-2006, 10:55 PM
  4. LK2554 Front Wheel Lockup
    By davefox in forum Kioti Owning/Operating
    Replies: 2
    Last Post: 12-05-2005, 11:49 AM
  5. Front wheel width adjustment on 4WD (TL2800F)
    By HurdleMills in forum Iseki
    Replies: 1
    Last Post: 09-10-2005, 10:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.