LK3054
I have rebuilt injector pump, injectors. I have disconnected fuel lines from pump ( all squirt great) I have removed injectors and put one on each line to check for injector spray 9All work great.
When I R/R the injector pump I was told that the gasket (metal) was the timing guage, so there was really no timing adjustment to worry about. But there was a slot that a pin had to go in like a fork,( this was to shut the fuel on and off by the pull cable?) So far if there is something wrong let me know.
It still will not run.
I have yet to do a compression test. Does anyone know what the threads etc are for this compression adaptor. I have a VW one but it does not fit?? Anyone know where I can get one??
Specs on compression?
Am I missing something before I outlay money for a compression tester?
On inspection of the intake manifold and looking into valve stem area I see black diesel like stuff on the end two cylinders.
I was dragging a driveway very slow it ran perfect I shut her down and two days later she would not start. They said 2 injectors were bad and then it wouldn't start and they said the pump needed to be rebuilt so I did and voila it still doesn't run. It turns over great, I ebven put a new battery in it.
Help before it becomes an artificial reef in my pond. Thanks Skip Fort Pierce Florida 772-359-3821 if you want to chat I'll call you back.
I have had the areas top Diesel dog make 2 appts. to come out and never show, no calls, I call him and the call gets dropped.....Imagine that I guess its a Fort Pierce Thing!!!!!!! :laughing::thumbsup:
I have rebuilt injector pump, injectors. I have disconnected fuel lines from pump ( all squirt great) I have removed injectors and put one on each line to check for injector spray 9All work great.
When I R/R the injector pump I was told that the gasket (metal) was the timing guage, so there was really no timing adjustment to worry about. But there was a slot that a pin had to go in like a fork,( this was to shut the fuel on and off by the pull cable?) So far if there is something wrong let me know.
It still will not run.
I have yet to do a compression test. Does anyone know what the threads etc are for this compression adaptor. I have a VW one but it does not fit?? Anyone know where I can get one??
Specs on compression?
Am I missing something before I outlay money for a compression tester?
On inspection of the intake manifold and looking into valve stem area I see black diesel like stuff on the end two cylinders.
I was dragging a driveway very slow it ran perfect I shut her down and two days later she would not start. They said 2 injectors were bad and then it wouldn't start and they said the pump needed to be rebuilt so I did and voila it still doesn't run. It turns over great, I ebven put a new battery in it.
Help before it becomes an artificial reef in my pond. Thanks Skip Fort Pierce Florida 772-359-3821 if you want to chat I'll call you back.
I have had the areas top Diesel dog make 2 appts. to come out and never show, no calls, I call him and the call gets dropped.....Imagine that I guess its a Fort Pierce Thing!!!!!!! :laughing::thumbsup: