CK30 Ignition switch replacement
Results 1 to 6 of 6
  1. #1
    Super Member sodamo's Avatar
    Join Date
    May 2004
    Big Island, HI
    Kioti CK30HST, Case DX35

    Default CK30 Ignition switch replacement

    Been a number of threads on this topic, some I've even contributed. Today I FINALLY replaced my switch. The replacement has a newer part number so I'm hopeful it is an improved version.

    The main point I want to make is how EASY this is to do. Not even a 5 minute job. Perhaps most difficulty was breaking open the harness LOL
    Anyway, nothing had to be removed or disassembled. Loosen the ring near the key, remove, and it basically falls out. Disconnect harness. Connect new harness, push into place with right hand, easier if you pre align the little locking thingy, screw on the nut with left hand, tighten and DONE!!!!
    Mine even takes the old key, so now I have extra.

    What a joy to have it start first try without any fuss.

    Please visit: Vacation Hawaii

    CK30HST, FEL w/ATI Tach all, Toothbar, Pallet forks, BH, Hydraulic Offset Flail, Brush Hog, Box Blade, PHD, Tiller, Landscape Rake, Boom pole w/extension&winch, Quick hitch, TuffTop Canopy
    Case DX35 w/LX116 "bobtach" Loader,

  2. #2
    Elite Member Dmace's Avatar
    Join Date
    Oct 2005
    Wakefield, NH
    Kioti CK20 HST

    Default Re: CK30 Ignition switch replacement

    What, no pictures...?
    Kioti CK20HST
    KL120 FEL // KB2365 BH // 60" JRW 3ph snowblower // 48" HD Boxblade
    Sims-Cab Depot heated cab
    Quote Originally Posted by DiamondPilot
    Now it's time for Ford and GM to step up

  3. #3
    Veteran Member
    Join Date
    Mar 2005
    Erie, Pennsylvania
    Kioti CK30HST

    Default Re: CK30 Ignition switch replacement

    Thanks for the info. My switch may need replaced.
    2004 Kioti CK30hst, KL130 fel, KB2375 bh

  4. #4
    Platinum Member Alien's Avatar
    Join Date
    Jul 2011
    Grantham, South East Queensland
    Kioti CK30 HST

    Default Re: CK30 Ignition switch replacement

    I have 406 hours and no probs so far but it is always good to be aware of potential failure.

  5. #5
    Elite Member
    Join Date
    Nov 2010
    kioti ck30

    Default Re: CK30 Ignition switch replacement

    unless I am mistaken all Kioti's take the same key

  6. #6
    Silver Member
    Join Date
    Feb 2011
    Central PA
    2010 Kioti DK50SE HST w/ 401 Loader

    Default Re: CK30 Ignition switch replacement

    I know mine took same key when i replaced the ignition switch yesterday. Was very easy job anyone could do it. Took longer to get the bolts aligned back up to the plastic steering column cover haha. Mine was under warranty so i just went and picked the part up and did myself, rather then waste the fuel to haul tractor 45 mins to Hoover Tractors. Great dealership in PA. So far been a great experience with them since i bought the tractor almost a year ago.

Similar Threads

  1. TC33D ignition switch replacement
    By RavenRock6 in forum New Holland Owning/Operating
    Replies: 7
    Last Post: 05-13-2017, 06:36 PM
  2. Ignition switch poor design
    By Wyld Bill in forum Mahindra Owning/Operating
    Replies: 2
    Last Post: 08-21-2012, 12:12 AM
  3. The Ignition Switch
    By Egon in forum John Deere Owning/Operating
    Replies: 9
    Last Post: 02-07-2009, 09:58 PM
  4. Bobcat ignition switch replacement
    By John80y in forum Parts/Repairs
    Replies: 1
    Last Post: 01-28-2008, 08:30 PM
  5. Ignition switch problem
    By davesisk in forum Power Trac
    Replies: 15
    Last Post: 10-15-2002, 03:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.