ERE
Silver Member
I started to reassemble my joy stick control after putting in the new cinamatic kit and realized that I hadn't marked the cables before I disassembled them. It would be such a big PITA to disassemble and redo after putting it back together that I hope one of you can tell me which side of the joy stick cable goes to which side of the valve control block. Unfortunately, the links are confusing. The diagram that Rick posted clearly shows the inside cable (which unless I'm mistaken controls up/down/float) on the joy stick block going to the inside of the hydraulic block, but several posts talk about using the outside cap on the control valve block to fix the problem of a hard operating float position. That would imply that the inside cable from the joy stick goes to the outside of the control valve block, that is that the cables cross over between the stick and the block. Anyhow, is anyone can help with my "aw sh.." I'd appreciate it.