Results 1 to 10 of 10
  1. #1
    Gold Member
    Join Date
    Nov 2008
    Posts
    435
    Location
    Western CT
    Tractor
    Kioti 20 HST ancient Rhino traded in

    Default Hydraulic coupling pressure relief tool

    Several years back, there was a post on this forum that detailed a tool that relieved the pressure build up in hydraulic hoses preventing reconnection. The manufacturer was a farm out west. I keep thinking it was Worth or Wirth Farm. It is the only tool they make and they sell it at farm and tractor shows. They do not have a web site. Does anyone remember this tool and the manufacturer? I would like to buy one since changing back and forth between my back hoe and my log splitter is a pain when pressure builds up. Even with a rag and a a rubber hammer I get a hydraulic bath sometimes. The tool was around $30.
    Any one out there with a good memory or better search techniques than I have?
    ck20 hst - QA KL120B FEL - KB2465 BH W/16"bucket and Thumb, Rear Snow Blower. Post hole digger, Pallet forks, 3pt log splitter.

  2. #2
    Silver Member mj007's Avatar
    Join Date
    Mar 2010
    Posts
    249
    Location
    Western Colorado
    Tractor
    2009 Kioti CK20S HST, 1937 Oliver 60 RC, 9 Case VA Series tractors, 222 Case & IHC Cub Cadet, Husqvarna r120s (mower)

    Default Re: Hydraulic coupling pressure relief tool

    Here ya go -

    Originally Posted by Gil Case
    I called Waite's, they said they have one product. A little gizmo to release the pressure in the hydraulic lines.
    $29.95 plus freight.
    2009 CK20S HST - KIOTI Loader & backhoe, backblade, FEL/3-point forklift attachment, 5-ft. brushhog

    Other tractors: 6 CASE VA Series, 1 Oliver 60, CASE 222 & IH Cub Cadet

  3. #3
    Gold Member
    Join Date
    Nov 2008
    Posts
    435
    Location
    Western CT
    Tractor
    Kioti 20 HST ancient Rhino traded in

    Default Re: Hydraulic coupling pressure relief tool

    Thank you, thank you. I got it now that you mention the last name.

    George White
    Atwood CO
    970-522-5696

    " of all the things I have lost, I miss my memory most"
    ck20 hst - QA KL120B FEL - KB2465 BH W/16"bucket and Thumb, Rear Snow Blower. Post hole digger, Pallet forks, 3pt log splitter.

  4. #4
    Gold Member BKBrown's Avatar
    Join Date
    Sep 2004
    Posts
    494
    Location
    Madison, VA
    Tractor
    Ventrac 4231 Gas

    Default Re: Hydraulic coupling pressure relief tool

    George Waite, Waite's Tools, P.O. Box 66, Atwood, Colo. 80722 (ph 970 522-5696

  5. #5
    Elite Member rlgustafson's Avatar
    Join Date
    Dec 2012
    Posts
    3,033
    Location
    Weimar, Texas
    Tractor
    NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4046HC w/FEL, WR Long 3rd Function.

    Default

    http://www.farmshow.com/a_download_p...p?aid=MTg2NTk=

    Sent from my iPad using TractorByNet
    Rick

    Trying to work smarter instead of harder with Technology and Horsepower!

  6. #6
    Silver Member Tony H's Avatar
    Join Date
    Mar 2013
    Posts
    131
    Location
    Summit, NY
    Tractor
    JCB MIDI CX

    Default Re: Hydraulic coupling pressure relief tool

    QUICK-ON

    Too bad they don't sell in the USA. we all have this problem, why aren't there many companies selling gizmos??
    JCB MIDI CX :
    4:1Bucket
    Front Mount Log Splitter
    Virnig SBV84 'V' plow a wonderful tool
    ---------------------------------------------------------
    Cub Cadet :
    42" snowplow
    Custom 2" Receiver Hitch

  7. #7
    Silver Member Phil48's Avatar
    Join Date
    Mar 2012
    Posts
    139
    Location
    Eastern TownShip
    Tractor
    CK20 HST

    Default Re: Hydraulic coupling pressure relief tool

    Quote Originally Posted by BKBrown View Post
    George Waite, Waite's Tools, P.O. Box 66, Atwood, Colo. 80722 (ph 970 522-5696
    It's a great tool!
    Phil

    http://www.tractorbynet.com/forums/k...bh-back-3.html
    Phil

  8. #8
    Silver Member Tony H's Avatar
    Join Date
    Mar 2013
    Posts
    131
    Location
    Summit, NY
    Tractor
    JCB MIDI CX

    Default Re: Hydraulic coupling pressure relief tool

    I was hoping to get a tool like the one I Linked above. That tool is designed to Press the connectors together without squirting a shot of fluid every time I reconnect. I already made a simple pressure relief tool. One male and one female Connector attached to a Brass Ball Valve. I works fine but I was looking to keep all the Hydra Fluid where it belongs.
    Attached Thumbnails Attached Thumbnails Hydraulic coupling pressure relief tool-bucket-decompression-valve1-jpg  
    JCB MIDI CX :
    4:1Bucket
    Front Mount Log Splitter
    Virnig SBV84 'V' plow a wonderful tool
    ---------------------------------------------------------
    Cub Cadet :
    42" snowplow
    Custom 2" Receiver Hitch

  9. #9
    Platinum Member
    Join Date
    Jun 2017
    Posts
    504
    Location
    West Chester
    Tractor
    Mahindra 2540

    Default Re: Hydraulic coupling pressure relief tool

    Heck, I just put an aluminum end on a small puller, and keep that around; it will grab either the male or female ends of Pioneer QRs, with either the balls or poppets, and release the pressure (wrapped in a rag, or you'll get messy!) Sometimes, if the ends on the implement/attachment are correct, you can mate those as soon as you remove it, and pressure will not build.

  10. #10
    Silver Member xcgreene's Avatar
    Join Date
    Jun 2015
    Posts
    162
    Location
    Down East Maine
    Tractor
    2 Kioti DK45SEH's 1969 John D 2510

    Default Re: Hydraulic coupling pressure relief tool

    Tractor side, with my 3rd function, I typically hook up whichever side is of lower pressure first, then blip my rocker switch over to relieve the other side. (keep in mind this may deadhead the equipment on the connected side, but this is what PRVs are for)

    But if we are talking about implement/attachments being locked up, it sure can be a pain in the butt if you had detached late last night, then, find you need to hook back up at high noon today. The sun heating everything up and all.

    I haven't picked one up just yet, but I think this would be of help Pioneer 1/2 in. Connect Under Pressure Tip, 1/2 in. NPTF at Tractor Supply Co.
    has a small pressure relief tip on the top of the poppet.
    2 Kioti DK45SEH's, 2 KL401 FELs, 2 KB2485 Backhoes, WR Long 3rd function kit, Igland GR40 Grapple, 84" Land Pride RDC1884 Rotary Mower, 78" JD 676 Snowblower, Home made Tree Puller

Similar Threads

  1. Pressure Relief Trouble (Blood Pressure and Hydraulic)
    By LouieJunior in forum Hydraulics
    Replies: 10
    Last Post: 08-26-2012, 04:35 PM
  2. Backhoe 757C Hydraulic pressure relief?
    By treefarmer391 in forum Attachments
    Replies: 2
    Last Post: 05-25-2010, 10:38 AM
  3. Hydraulic pressure relief? B series
    By Grubs in forum Kubota Owning/Operating
    Replies: 3
    Last Post: 11-01-2009, 12:25 PM
  4. IH 234 Hydraulic Pressure/Relief Valve
    By jbos333 in forum Case-IH
    Replies: 6
    Last Post: 08-29-2009, 04:16 AM
  5. Hydraulic pressure relief tool
    By BeauGeste in forum Hydraulics
    Replies: 5
    Last Post: 06-14-2009, 10:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2017 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.