Buckgnarly
Platinum Member
After much searchingand dealer run around, Rick (member name "wallace") helped me out by providing me a block heater that would fit my DS3510, so HUGE thanks to him for knowing and providing a block heater that would work!
Here's the install for anyone interested....
Removing muffler makes it much easier....after R&R a trans on a 2008 Focus this week, working on a tractor is SOOOO nice!!
Freeze plug used, it's the one right by the starter. When knocking it out, hit the upper right as the lower middle is the closest to the cylinder sleeve. You have mch more room to "flip" the freeze plug if you hit it top right.
Insert and heating element....
Freeze plug tool is VERY nice to have for this install, but an impact socket will work too....
Installed...
Final install with paint.....
Plug location, right by clutch pedal, can be tucked away for the few "Warm" months we have....
Here's the install for anyone interested....
Removing muffler makes it much easier....after R&R a trans on a 2008 Focus this week, working on a tractor is SOOOO nice!!

Freeze plug used, it's the one right by the starter. When knocking it out, hit the upper right as the lower middle is the closest to the cylinder sleeve. You have mch more room to "flip" the freeze plug if you hit it top right.

Insert and heating element....

Freeze plug tool is VERY nice to have for this install, but an impact socket will work too....

Installed...

Final install with paint.....

Plug location, right by clutch pedal, can be tucked away for the few "Warm" months we have....
