Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29
  1. #21
    Member
    Join Date
    Feb 2012
    Posts
    45
    Location
    Kalama wa
    Tractor
    Kioti DS 4110

    Default Re: ignition switch on ds 4110 not working

    Quote Originally Posted by murphy1244 View Post
    .

    Yes.
    I asked my dealer about new switches when I picked up another switch, he told me he had not heard of any new switchs, then mentioned he had about 15 of the ones he was giving me on hand . The switches are big problem in our area I guess. Will have to look for a different source for new style. I weather proofed the one I got from him. We will see how that works.

  2. #22
    Super Star Member murphy1244's Avatar
    Join Date
    Nov 2011
    Posts
    16,510
    Location
    Ohio
    Tractor
    Kioti DK 40-Massey ferguson 135-Ventrac 4500 Diesel

    Default Re: ignition switch on ds 4110 not working

    Do you leave your tractor outside?
    Murph ------------

  3. #23
    Elite Member Coyote machine's Avatar
    Join Date
    May 2009
    Posts
    4,370
    Location
    Southern VT
    Tractor
    '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 boxblade, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Mower. Diamondplate aluminum canopy.

    Default Re: ignition switch on ds 4110 not working

    Quote Originally Posted by Kioti Lee View Post
    Hey old dogs can learn new tricks
    Good 'ole 'dog', woof!
    2010 DK-40se/hst, Kioti KL-401 FEL, (with reversible Kioti cutting edge), 72" Ratchet Rake. Fit Rite Top-N-Tilt hydraulics & diverter valve. HLA Series 2000 7' snowplow, Aquiline MPC rear chains.

    Scag Wildcat: Kawasaki 26HP, with bagger system. Dr. brush mower, & 42" lawn deck, Dr. self propelled, 6.5HP Trimmer mower. Pro-Mow 3 gang mower, no HP.

    Bunch of STIHL chainsaws: 011x 2, MS192T, MS200T, MS180C, MS230, MS270 (Wood Boss), 038 Farmboss, '86 anniversary edition.

  4. #24
    Member
    Join Date
    Feb 2012
    Posts
    45
    Location
    Kalama wa
    Tractor
    Kioti DS 4110

    Default Re: ignition switch on ds 4110 not working

    Quote Originally Posted by murphy1244 View Post
    Do you leave your tractor outside?
    The tractor is stored in a tent carport most of the time, but my property is in two seperate pieces conected by a dirt road. When dry the road is passable, when wet it is a real chore to get over. So the tractor will sit at the job for a couple days, under a tarp and quite often it is raining while using the tractor. Can be very muddy

  5. #25
    New Member
    Join Date
    May 2014
    Posts
    1
    Location
    mason city,IL
    Tractor
    4110

    Default Re: ignition switch on ds 4110 not working

    the ignition switch on my 4110 just clicks when i try to start it how do you remove and replace the ignition switch??

  6. #26
    Gold Member
    Join Date
    Jan 2011
    Posts
    321
    Location
    Queensland Australia
    Tractor
    Kioti DS4510HS , Kubota B7100

    Default Re: ignition switch on ds 4110 not working

    Quote Originally Posted by virgina View Post
    the ignition switch on my 4110 just clicks when i try to start it how do you remove and replace the ignition switch??
    Could be the fuel stop solenoid. Check the stop fuse and also the hold fuse. There was a bad batch of solenoids and eventually a revised part was provided.

  7. #27
    Member
    Join Date
    Feb 2012
    Posts
    45
    Location
    Kalama wa
    Tractor
    Kioti DS 4110

    Default Re: ignition switch on ds 4110 not working

    Quote Originally Posted by virgina View Post
    the ignition switch on my 4110 just clicks when i try to start it how do you remove and replace the ignition switch??
    It is not hard to do. You just have to remove the "dash board" As I recall there are four screws holding it in. You also have to remove pto switch and throttle lever. There is a "nut" on back of switch that unscrews and switch assembly unplugs and plug in new one. Am sure I am forgetting some things but you will see them as you go. I am not mechanically inclined and was able to it easily. Have done several times since. I coated the last one with liquid electrical tape and have been diligent about keeping it covered. Made it through the winter with one switch

  8. #28
    Gold Member Kioti Tom's Avatar
    Join Date
    Jan 2012
    Posts
    483
    Location
    Industry, Pa- - 5 mi. north of Ohio River
    Tractor
    Kioti DS4510, Ford '48 8N, Ford '53 Jubilee, Power King 1614

    Default Re: ignition switch on ds 4110 not working

    My problem was not the fuel stop solenoid, but the module that controls it.
    We had tried the solenoid but no change in problem. Ended up replacing the
    module and no problems for over a year. It is located under the dash. We
    put the original solenoid back in and is still there.
    Kioti 2012 DS4510 with FEL
    Ford 1948 8N
    Ford 1953 Jubilee
    Power King 1614
    Various 3 pt. equipment
    Sold: Ford 1946 2N, Kioti 2011 DS3510

  9. #29
    Platinum Member ritcheyvs's Avatar
    Join Date
    Nov 2011
    Posts
    780
    Location
    Kittrell, NC
    Tractor
    Kioti DK45S

    Default Re: ignition switch on ds 4110 not working

    Quote Originally Posted by virgina View Post
    the ignition switch on my 4110 just clicks when i try to start it how do you remove and replace the ignition switch??
    A more complete description/discussion is more likely to produce useful information. Does the starter crank the engine? Do the emergency flashers work? Is the battery good (how do you know)? Are the battery cables good (again, how do you know)? Can you identify the source of the "click" (glow plug relay, stop solenoid)? Does your tractor even have a stop solenoid (I'm not familiar with that model)? What model year is the tractor (or what is the first digit of the serial number)? What else have you observed? Have you tried squirting WD-40 or contact cleaner into the key hole?

    As has been mentioned, the key switch is a common failure item but I think more diagnosis is in order before you start swapping parts.
    Scott
    Kioti DK45S, KL451 loader, Howse 601S cutter, Phoenix M72S mower, Deere BB5072 Box Scraper, Fit Rite Hydro Top Link

Page 3 of 3 FirstFirst 123

Similar Threads

  1. ignition switch help
    By Licking in forum Chinese Tractors
    Replies: 1
    Last Post: 01-24-2012, 02:44 PM
  2. TC40 Rabbit / Turtle switch not working, switch and relays replaced.
    By IsuzuDon in forum New Holland Owning/Operating
    Replies: 21
    Last Post: 03-20-2011, 07:24 PM
  3. Ignition switch, or something else?
    By Jason_MI in forum Parts/Repairs
    Replies: 18
    Last Post: 03-05-2011, 11:42 PM
  4. The Ignition Switch
    By Egon in forum John Deere Owning/Operating
    Replies: 9
    Last Post: 02-07-2009, 09:58 PM
  5. No power to ignition switch Where is switch 28
    By hbaird in forum Chinese Tractors
    Replies: 7
    Last Post: 05-20-2005, 12:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.