Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Bronze Member
    Join Date
    Oct 2012
    Posts
    63
    Location
    Highfields, Qld, Australia
    Tractor
    Yanmar ym1510d Kioti ds3510

    Default rear remote for DS3510

    I have a Kioti DS3510 with a 4in 1 loader. I would like to have a rear remote so I can adjust the top link of the 3pl on the go. Can somebody advise me how to go about it myself as the local expert reckons he would charge approx $2000 to do it, without the ram on the top link. There must be an easier/cheaper way to do it than that.
    Help would be appreciated.
    Thanks, Geoff

  2. #2
    Elite Member
    Advertiser
    MtnViewRanch's Avatar
    Join Date
    Mar 2005
    Posts
    7,542
    Location
    4000\' mountains of Southern California
    Tractor
    Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,

    Default Re: rear remote for DS3510

    Quote Originally Posted by 13gef13 View Post
    I have a Kioti DS3510 with a 4in 1 loader. I would like to have a rear remote so I can adjust the top link of the 3pl on the go. Can somebody advise me how to go about it myself as the local expert reckons he would charge approx $2000 to do it, without the ram on the top link. There must be an easier/cheaper way to do it than that.
    Help would be appreciated.
    Thanks, Geoff
    Can you not just get the OEM remote from a Kioti dealer? Should be less than $500 Typically I would charge about $780 + shipping to use an after market valve and provide the top link kit.

    I would do some more checking around down there.

    Good luck
    Brian
    Top and Tilt Kits by Fit Rite Hydraulics

  3. #3
    Bronze Member
    Join Date
    Oct 2012
    Posts
    63
    Location
    Highfields, Qld, Australia
    Tractor
    Yanmar ym1510d Kioti ds3510

    Default Re: rear remote for DS3510

    Quote Originally Posted by MtnViewRanch View Post
    Can you not just get the OEM remote from a Kioti dealer? Should be less than $500 Typically I would charge about $780 + shipping to use an after market valve and provide the top link kit.

    I would do some more checking around down there.

    Good luck

    Bought the Kioti remote kit like you suggested but it came with no install instructions. Have you got any instructions you can send me as I have no real idea where it all goes. Nearest dealer is 80km away. Rang the supplier and he said "this is how they come, no instructions". I'm pretty handy with tools as long as I have some idea where everything goes. Would it be better to start a new thread? I've already got grey hair so this could probably send me bald.
    Thanks, Geoff

  4. #4
    Super Star Member murphy1244's Avatar
    Join Date
    Nov 2011
    Posts
    16,783
    Location
    Ohio
    Tractor
    Kioti DK 40-Massey ferguson 135-Ventrac 4500 Diesel

    Default Re: rear remote for DS3510

    You need the service manual.
    Murph ------------

  5. #5
    Platinum Member rmorey's Avatar
    Join Date
    Nov 2012
    Posts
    803
    Location
    Eastern Ontario
    Tractor
    Kioti DK40SE HST Cab, Mechron 2200

    Default Re: rear remote for DS3510

    Quote Originally Posted by 13gef13 View Post
    Bought the Kioti remote kit like you suggested but it came with no install instructions. Have you got any instructions you can send me as I have no real idea where it all goes. Nearest dealer is 80km away. Rang the supplier and he said "this is how they come, no instructions". I'm pretty handy with tools as long as I have some idea where everything goes. Would it be better to start a new thread? I've already got grey hair so this could probably send me bald.
    Thanks, Geoff
    Geoff,

    Can you not just ask the dealer? Would he/she not help you out and get you some instructions?
    Rick

  6. #6
    Elite Member
    Advertiser
    MtnViewRanch's Avatar
    Join Date
    Mar 2005
    Posts
    7,542
    Location
    4000\' mountains of Southern California
    Tractor
    Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,

    Default Re: rear remote for DS3510

    Quote Originally Posted by 13gef13 View Post
    Bought the Kioti remote kit like you suggested but it came with no install instructions. Have you got any instructions you can send me as I have no real idea where it all goes. Nearest dealer is 80km away. Rang the supplier and he said "this is how they come, no instructions". I'm pretty handy with tools as long as I have some idea where everything goes. Would it be better to start a new thread? I've already got grey hair so this could probably send me bald.
    Thanks, Geoff
    Do a search, there are several guys that have installed these themselves and I would think that they can-would help you out with the installation.

    Unfortunately I would be completely blind since I don't have any Kioti tractors to look at and have never even worked on one.

    Sorry.
    Brian
    Top and Tilt Kits by Fit Rite Hydraulics

  7. #7
    Super Star Member J_J's Avatar
    Join Date
    Sep 2003
    Posts
    17,119
    Location
    JACKSONVILLE, FL
    Tractor
    Power-Trac 1445, KUBOTA B-9200HST

    Default Re: rear remote for DS3510

    Do you know anything about your hyd flow path?

    Here is the hyd data.

    HYDRAULIC SYSTEM
    Pump Gear(Tandem)
    Pump Capacity(Max. flow rate) gpm(ℓ /min) 12.7(48.3)
    3-Point Hitch Category I
    Maximum Lifting Capacity at 24 aft. of hitch lbs.(kg) 2238(1015)
    Hydraulic Lift Control System Position Control
    Steering Hydrostatic Power Steering

    If you have PB out of your loader valve, it is probably going to the 3pt.

    You need to interrupt the PB line and run the loader PB line to the IN port of the remote valve.

    From the remote, the PB line will go to the 3pt line that you cut or interrupted.

    The OUT from the remote should go to tank.

    You simply want to install all valves in series and have a good flow to tank so there is no or very little back pressure.

    Set valve relief to tractor relief pressure.

    With all valves in neutral, the pump flow should be from pump, to loader, to remote, to 3pt, to tank.

    Should you want to install a BH at some time, install a QD on the loader PB line going to the remote and plug the BH into the PB QD. The BH OUT will go to tank.

    You might have a hyd block where lines are routed into and out of the hyd block.
    J.J.

    When I works, I works hard. When I sits and thinks, I goes to sleep.

    Git er done.

  8. #8
    Bronze Member
    Join Date
    Oct 2012
    Posts
    63
    Location
    Highfields, Qld, Australia
    Tractor
    Yanmar ym1510d Kioti ds3510

    Default Re: rear remote for DS3510

    Thanks for the info. Tried a search, maybe my words were not right, nothing applicable. The kit is , I'm told, complete and includes all that is required. All pipes are prebent and are 3/8 steel and include a double acting valve assembly and mounting bracket. From what I understand the valve goes up under the seat and the wheel and guard have to come off. It may be obvious where everything goes once I start but I need some idea. It might be beyond me and I need to take it to town and get the hydraulic guys to fit it.
    Thanks, Geoff

  9. #9
    Bronze Member
    Join Date
    Oct 2012
    Posts
    63
    Location
    Highfields, Qld, Australia
    Tractor
    Yanmar ym1510d Kioti ds3510

    Default Re: rear remote for DS3510

    Quote Originally Posted by murphy1244 View Post
    You need the service manual.
    Where can I get one and does it cover fitting remote which is an accessory?
    Thanks

  10. #10
    Elite Member
    Advertiser
    MtnViewRanch's Avatar
    Join Date
    Mar 2005
    Posts
    7,542
    Location
    4000\' mountains of Southern California
    Tractor
    Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,

    Default Re: rear remote for DS3510

    Quote Originally Posted by 13gef13 View Post
    Where can I get one and does it cover fitting remote which is an accessory?
    Thanks
    These guys are suppose to have them. Kioti DS3510 Current Special - Tractor Shop


    I would think that your dealer could get you one if they don't already have one though.
    Brian
    Top and Tilt Kits by Fit Rite Hydraulics

Page 1 of 2 12 LastLast

Similar Threads

  1. Rear remote
    By Pitch1 in forum Mahindra Owning/Operating
    Replies: 1
    Last Post: 07-29-2012, 06:50 PM
  2. 3-Point Hitch Rear Remote
    By tdsteven in forum Mahindra Owning/Operating
    Replies: 1
    Last Post: 04-08-2010, 11:22 AM
  3. rear remote help
    By ford farm boy in forum Kubota Owning/Operating
    Replies: 5
    Last Post: 12-02-2009, 07:25 PM
  4. Rear Hyd Remote?
    By chazzy in forum Attachments
    Replies: 16
    Last Post: 09-25-2009, 12:23 AM
  5. Rear Blade Rear Blade, Hydraulic Tilt or Hydraulic Offset (only one rear remote)
    By CowwFace in forum Attachments
    Replies: 4
    Last Post: 09-14-2009, 06:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.