DK55/45C and backhoe

[Goalnightx]

I know that you can now buy the backhoe for a DK55 but is the subframe pretty strong and how easy is it to take off and use regular 3pt attachments? Thanks

[KiotiJohn]

I have seen the DK55 with Backhoe and there are only two pins to remove, disconnect hoses and drive away. It was very easy. John

[Goalnightx]

Thanks John. Did it look like the 3pt was useable after that or did the subframe appear to be in the way?

[Dewave]

<font color="blue">Did it look like the 3pt was useable after that or did the subframe appear to be in the way? </font>

The remaining subframe that the Bh attaches too is minimal and has no effect on the 3pt operation.

[BigAl]

I have the Dk45 witha 2385 sub frame mount and it is very easy to chage out . 2 pins and disconnect the hoses ! [img]/forums/images/graemlins/smile.gif[/img] It does not interfer with any of my 3 pt attachments. I have also owned a 3 pt. mount backhoe on a Kubota and it was a royal pain to remove . I kept bending pins and then I would end up using a cutting torch to remove them [img]/forums/images/graemlins/frown.gif[/img]. I guess it was just to much weight on the 3/4 pins .
Big Al

[KiotiJohn]

Goalknightx, You have the answer, now go get you one! John

[wallace]

Goalnightx, I have the subframe instock if you want any pictures or I can show you the mounting instructions if you are interested [img]/forums/images/graemlins/grin.gif[/img]

[KiotiJohn]

Goalnightx, sorry I misspelled your name in the earlier post, guess you'll be a KNIGHT on that new Kioti you're going to buy. Or at least feel like a charging one. [img]/forums/images/graemlins/grin.gif[/img] We're all Knights of the Kioti! John