jbain
Member
Any one ever adjust the spring tension?
If the service manual tells you how thick a shim you need to increase the pressure x % then it (in my opinion) would be worth trying to increase the pressure a few hundred PSI just to see if the pump will do it.
Have you checked each and every quick connect at the underside of the right side floorboard where they all interconnect to allow FEL function? If NOT, then check them all and try pulling them apart by hand. It's possible to hit something sticking up in a field or wooded area and disconnect partially, and then so does function control.
Look elsewhere to make sure there are no hydraulic leaks you don't see, with cardboard or a piece of wood, NOT your hand. Don't look for the most detrimental problem, it's not likely. What exactly happened when you were mowing to create this situation. were you lifting the loader to get it above a fence section or what? Have you experienced any odd issues prior to loosing power? What do you most use your tractor for? Could you have deadheaded the pump- leaving a rear remote engaged with no flow?