Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Platinum Member
    Join Date
    Sep 2002
    Posts
    624
    Location
    MD
    Tractor
    NH TC33D

    Default Re: Aux Electric

    yea, I tried the sprayer in the bucket method...you do tend to ingest more than is probably good for you...swtiched to the back mounted on a pallet on the carry-all...

    for the connection, I use some large alligator clips directly to the battery and a switch mid-line that clips onto the loader bracket on top of the dash...it ain't pretty, but its easy to install/remove and it works well.

  2. #12
    Veteran Member
    Join Date
    Mar 2005
    Posts
    1,536
    Location
    Erie, Pennsylvania
    Tractor
    Kioti CK30HST

    Default Re: Aux Electric

    I have a CK30HST and wanted to mount a rear work light. I found wires with bullet connectors to the rear of the tool box under the orange sheet metal. One was hot all the time, two hot with the key on, and the other hot with the headlights on. The wires aren't that heavy and imagine they would only hold 10 to 15 amps. They come out of a black plastic wire loom. If you don't see the wire ends, maybe they are inside the loom. I still have to check and see which fuse works for which wire to see how heavy they fused it and maybe one of these is the one you mentioned.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.