BX24 pallet forks question

dal929 · 07-30-2008, 12:38 PM

Hello Folks..newbie here, great site. Picked up a used 07 BX24 with 37hrs last weekend for property maintenance/projects. Coolest toy in my chest. My girlfriend thinks I'm a kid but when I pulled up at the house at 9:30pm with it on the trailer 3 different neighbors came running out to check it out....guess I'm not the only kid. I'm interested in getting a pair of pallet forks but don't want the ones that hang off of the FEL. Anyone know if they make pallet forks that can go in place of the FEL for the BX24??

Thanks
Dal

ChuckinNH · 07-30-2008, 01:08 PM

Although they are not "quick change" ATI, who advertises on this site has forks that will fit your BX.

kennyd · 07-30-2008, 01:44 PM

By "FEL" Do you mean the bucket? You would need to have the FEL in place, but remove the bucket to pin on the forks.

07-30-2008, 12:38 PM	#1 (permalink)
dal929 New Member Join Date: Jul 2008 Posts: 9	BX24 pallet forks question Hello Folks..newbie here, great site. Picked up a used 07 BX24 with 37hrs last weekend for property maintenance/projects. Coolest toy in my chest. My girlfriend thinks I'm a kid but when I pulled up at the house at 9:30pm with it on the trailer 3 different neighbors came running out to check it out....guess I'm not the only kid. I'm interested in getting a pair of pallet forks but don't want the ones that hang off of the FEL. Anyone know if they make pallet forks that can go in place of the FEL for the BX24?? Thanks Dal

07-30-2008, 01:08 PM	#2 (permalink)
ChuckinNH Veteran Member Join Date: Jun 2003 Location: NH Posts: 1,366	Re: BX24 pallet forks question Although they are not "quick change" ATI, who advertises on this site has forks that will fit your BX. __________________ B2620,Loaded R-4's , Wallenstein BX42 chipper, Bush Hog SQ148 RC, 4' x 8' chain harrow, and more to come...

07-30-2008, 01:44 PM	#3 (permalink)
kennyd Elite Member Join Date: Jul 2003 Location: Westminster, MD Posts: 3,523	Re: BX24 pallet forks question By "FEL" Do you mean the bucket? You would need to have the FEL in place, but remove the bucket to pin on the forks. __________________ JD 4110HST FEL, 60" MMM, 60" Rear Blade, Ballast Box, I-Match, #380 Snow Plow, FEL Forks, Goossen 3PH Chipper/Shredder, Markham LD-48 Grapple and much more "stuff"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode