| |
| |
| ||||||||||||||||||||||
| | #11 (permalink) |
| Bronze Member Join Date: May 2009
Posts: 91
| I finally found what I was looking for! A nice list of all of the BX accessory numbers and MSRP pricing. Use Google and search for BX8064A and it should be the only hit that comes up. The BX section starts on page 75. |
| | |
| | #12 (permalink) |
| Gold Member Join Date: Jul 2008 Location: La Plata, MD
Posts: 365
| Great .pdf someone compiled with some really good information. Saved it to my laptop for future use. Thanks Jeff.
__________________ BX24, FEL, BH, 60" MMM, Loaded R4's, 4' Farm Force Box Blade, Leinbach 7200JR PHD w/ 12" & 9" augers, Cosmo XB 3PH spreader, Rear Bro-Tek Skid Plate, BXpanded BH Dolly/Bucket Hooks/Tool Pouch, drag harrow, Larry's Mower Axle Stands, 52" Rachet Rake, Millcreek manure spreader |
| | |
| | #13 (permalink) |
| Bronze Member Join Date: May 2009
Posts: 91
| Hi thavil Yes it is what I was looking for. It amazes me that Kubota does such a poor job advertising the accessories. You would think they would all be in the color sales brochure from the dealership and on the main Kubota web site. You can tell how poorly they are advertised by the fact that that part number for the suitcase weight bracket only brought up one lonely hit on the whole internet! Now that I posted another question about it on TBN now there are two hits! I see two different canopies on this list, they are also not advertised very well. They would sell allot more stuff if people knew it was available! |
| | |
| | #14 (permalink) |
| Silver Member Join Date: Apr 2007 Location: Minnesota
Posts: 147
| Are you committed to buying only Kubota brand attachements? I mention this because there are a number of 3PH blowers out there for a whole lot less money. Because they are 3PH, compatibility usually isn't an issue for hooking them up. FWIW, I have a 60" 3PH blower for my BX2350 and it really is nice having that extra width so my tires don't have to get so close to the drop offs on the edges of the driveway. Plus if you're making any turns while blowing there is less chance of the front tires running over the unblown snow. On a couple of occasions I've hit drifts big enough to fill the entire opening of the blower and the engine seemed to handle it well. If it was a problem I'd just go a little slower.
__________________ '07 BX2350, FEL w/ toothbar, 60" MMM, 5' KK back blade, 5' KK-XB landscape rake, 4' KK box blade, 60" Farm King 3PH snowblower |
| | |
| | #17 (permalink) | |
| New Member Join Date: Oct 2009
Posts: 1
| Quote:
I am not sure of BX24 fit as it is not listed on the sheet I have for the BX series. I am looking for the BX2711 & BX2712 and have a BX2751 & BX2752 that I need to part with. | |
| | |
| | #18 (permalink) |
| Gold Member Join Date: Jul 2008 Location: La Plata, MD
Posts: 365
| Here is the link Jeff was referring to http://www.okc.gov/agendapub/cache/2...9055123899.PDF from a google search.
__________________ BX24, FEL, BH, 60" MMM, Loaded R4's, 4' Farm Force Box Blade, Leinbach 7200JR PHD w/ 12" & 9" augers, Cosmo XB 3PH spreader, Rear Bro-Tek Skid Plate, BXpanded BH Dolly/Bucket Hooks/Tool Pouch, drag harrow, Larry's Mower Axle Stands, 52" Rachet Rake, Millcreek manure spreader |
| | |
| | #19 (permalink) |
| Bronze Member Join Date: May 2009
Posts: 91
| The link changes each time ....., any link posted up here will not work a second time..... so just use Google and search for BX8064A and it will be one of the 2 links........ the other is a post by me here on TBN |
| | |
![]() | ||
| Thread Tools | |
| Display Modes | |
|
|
| ||||||||||||||||||||||
| Terms of Use | Privacy Policy | Advertise | © 2009 TractorByNet.com |
| Safety Warning: TractorByNet.com does not review discussion forum posts for accuracy or safety. Please refer to manufacturer operator and safety manuals before operating tractors or equipment. Additionally, use caution and common sense when applying any advice you receive on TractorByNet.com, and seek professional advice before attempting professional tasks. |