hydrasports
Member
I grabbed this info from another site but was relevant to my question:
"*note* the 50 series generated several factory recalls that were free to these models, even those that were out of OEM warranty. Most of these series tractors should have had these done but there may be a few around that haven't.
The recalls included:
1-Replacement battery cover frame. Stiffens the screen cover for a more secure and tighter fit.
Part number- K2581-57134
2-Grip Kit. Contains all the plastic handles and lever sleeves for the levers and knobs. Replaces original loose fitting covers.
Part number - K2581-9557-0
3-Cluster kit: This is the dash cluster for all the gauges. The first design could accumulate moisture inside & fail, or the hour meter may fog up becomeing unreadable or may not work properly
BX1850 Part number K2501-6250-2
BX2350/BX24 Part number K2581-6250-2
4- Fender Kit: Replacement composite rear fender w/additional formed ribbing to add strength at critical load bearing point(s).
Part number K2581-95522
5-Step stay kit: Large steel support brackets that bolt to the main frame and add additional support to the composite fender assembly.
BX2350/1850 part number K2581-9554-0
BX24 Part number K2592-9554-0
6- Replacement Seat - Service Bulletin PIB-2007-027
Just found out that Kubota extended this recall to 48 months from the date of the original purchase. So, if you have purchased a used one and it wasn't updated w/the fix, make sure you find out the original date of purchase to be sure that it's still under warranty.
4) Seat recall. All 50 series BX's (plus select B's) that were under warranty recieved new VASTLY more comfortable seats free and those that were not under warranty recieved the seat at vastly reduced prices or free (dependant upon the dealer). This seat is a HUGE improvement, so much so that I purchased one for my BX23 that wasn't covered at all under this recall). This seat is a direct boltup to all BX's & B's."
Does anyone know how to tell if these "repairs" were completed and if so explain to me what to look for? Even better photos to show me what to look for?
I was hoping to get into a 2360 however I think finances just will not allow where I can still get a 2350 but just want to make sure all recall items have been performed, and I do not know what to look for.
Thank you!!
Steve
"*note* the 50 series generated several factory recalls that were free to these models, even those that were out of OEM warranty. Most of these series tractors should have had these done but there may be a few around that haven't.
The recalls included:
1-Replacement battery cover frame. Stiffens the screen cover for a more secure and tighter fit.
Part number- K2581-57134
2-Grip Kit. Contains all the plastic handles and lever sleeves for the levers and knobs. Replaces original loose fitting covers.
Part number - K2581-9557-0
3-Cluster kit: This is the dash cluster for all the gauges. The first design could accumulate moisture inside & fail, or the hour meter may fog up becomeing unreadable or may not work properly
BX1850 Part number K2501-6250-2
BX2350/BX24 Part number K2581-6250-2
4- Fender Kit: Replacement composite rear fender w/additional formed ribbing to add strength at critical load bearing point(s).
Part number K2581-95522
5-Step stay kit: Large steel support brackets that bolt to the main frame and add additional support to the composite fender assembly.
BX2350/1850 part number K2581-9554-0
BX24 Part number K2592-9554-0
6- Replacement Seat - Service Bulletin PIB-2007-027
Just found out that Kubota extended this recall to 48 months from the date of the original purchase. So, if you have purchased a used one and it wasn't updated w/the fix, make sure you find out the original date of purchase to be sure that it's still under warranty.
4) Seat recall. All 50 series BX's (plus select B's) that were under warranty recieved new VASTLY more comfortable seats free and those that were not under warranty recieved the seat at vastly reduced prices or free (dependant upon the dealer). This seat is a HUGE improvement, so much so that I purchased one for my BX23 that wasn't covered at all under this recall). This seat is a direct boltup to all BX's & B's."
Does anyone know how to tell if these "repairs" were completed and if so explain to me what to look for? Even better photos to show me what to look for?
I was hoping to get into a 2360 however I think finances just will not allow where I can still get a 2350 but just want to make sure all recall items have been performed, and I do not know what to look for.
Thank you!!
Steve