Results 1 to 4 of 4
  1. #1
    Gold Member Rusty's Avatar
    Join Date
    May 2003
    Posts
    381
    Location
    Hampton Township, Bay County, Michigan
    Tractor
    Kubota B7500HSD-R

    Default B2650 on B7500?

    I'm looking at a B2650 front mount snowblower for use on my 2003 B7500 HSD. The snowblower was bought new with a 2004 B2410 HSD. Both tractors have FELs (LA302, LA352) and RCK60-24B MMMs. Does anyone know if the subframe and PTO are the same for both tractors? Also, the current owner of the snowblower says that he does not have to remove the FEL frame or MMM front attachment bracket to install the snowblower. Can anyone confirm this? Any other comments on the B2650? Thanks, in advance!

  2. #2
    Veteran Member lawn_king's Avatar
    Join Date
    Jun 2006
    Posts
    1,600
    Location
    Hanover massachusetts
    Tractor
    kubota L 3540 hsdc,B 2320 hsdc & lots of other stuff!

    Default Re: B2650 on B7500?

    Hello rusty, that subframe doe's fit both the 7500 & the 2410, installation of the subframe is actually easy if you have a fel. If you purchase the 2650 send me a pm i can give you some information on that unit that will save you some pain, i ran a 2650 on a B7500 for years, its a good rig but it needs some modifications for serious snowblowing. Scott

  3. #3
    Gold Member Rusty's Avatar
    Join Date
    May 2003
    Posts
    381
    Location
    Hampton Township, Bay County, Michigan
    Tractor
    Kubota B7500HSD-R

    Default Re: B2650 on B7500?

    Thanks, Scott! Did you also have a mmm on your B7500? If so, did you have to remove the mmm front attachment bracket to install the B2650? I seem to remember reading that here on TBN, but have been unable to find the post in my searching.

  4. #4
    Veteran Member lawn_king's Avatar
    Join Date
    Jun 2006
    Posts
    1,600
    Location
    Hanover massachusetts
    Tractor
    kubota L 3540 hsdc,B 2320 hsdc & lots of other stuff!

    Default Re: B2650 on B7500?

    I did not have a mmm, i would guess you need to remove the subframe for the mower. It's only 4 bolts to remove the subframe if you have a fel. kubota also offered a B2019, 60" power angle plow for the same subframe, best plow i ever owned.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.