Results 1 to 5 of 5
  1. #1
    Platinum Member jas67's Avatar
    Join Date
    May 2008
    Posts
    985
    Location
    Central PA
    Tractor
    Kubota B7610 + Kubota G1800-S

    Default G1800/G1900/G2000/G5200/G6200 RC48-G20 mower guide wheel replacement

    The guide wheels and shafts on the RC48-G20 on my G1800 are completely shot, do to previous owner(s) lack of greasing them.

    One of the rubber wheels is chewed up too, since the pin holding it on came out while I was backing up and it ended up under the deck while the blades where spinning.

    Bottom line for the parts for new ones $300 for the pair

    Anyone here know where I can get a decent set used, that aren't worn out?
    I put about 60 hours per year on this mower, so with proper maintenance, a good used set will last me "forever".

    Thanks,
    Jay
    '05 B7610 w/ LA352 FEL
    Everything Attachments Pin-on Pallet Forks, home-made FEL quick attach to swap between these forks and the bucket, Dual rear remotes, CCM Top-N-Tilt, Woods SB60 snowblower, 66" United box blade, 60" back blade (cheapo, old and rusty), 60" KK rake, Woods PHD w/ 9" auger, Yanmar RS1303 3pt tiller, Kubota Ballast box (came with the tractor), Farm Force Carry All.
    '9? G1800S, 48" MMM. 70's Troy Bilt Horse tiller with new 6.5HP briggs engine.

    The means justify the ends.

  2. #2
    Veteran Member
    Join Date
    Oct 2008
    Posts
    1,013
    Location
    Mid. Coast Maine
    Tractor
    7610 hst

    Default Re: G1800/G1900/G2000/G5200/G6200 RC48-G20 mower guide wheel replacement

    Me too.. I replaced mine this spring and the price at the dealership was way too high.. Did a search and found that Amazon had the best price.. I clipped this from my invoice..
    210-108 Plastic Deck Roller kubota / 76559-46250 $15.25 3 $45.75
    Subtotal: $45.75
    Shipping cost: $9.95

    Hope it helps..

  3. #3
    Platinum Member jas67's Avatar
    Join Date
    May 2008
    Posts
    985
    Location
    Central PA
    Tractor
    Kubota B7610 + Kubota G1800-S

    Default Re: G1800/G1900/G2000/G5200/G6200 RC48-G20 mower guide wheel replacement

    Quote Originally Posted by hr3 View Post
    Me too.. I replaced mine this spring and the price at the dealership was way too high.. Did a search and found that Amazon had the best price.. I clipped this from my invoice..
    210-108 Plastic Deck Roller kubota / 76559-46250 $15.25 3 $45.75
    Subtotal: $45.75
    Shipping cost: $9.95

    Hope it helps..
    That is the front anti-scalp rollers, I need the rear ones (about 6" in dia.).
    '05 B7610 w/ LA352 FEL
    Everything Attachments Pin-on Pallet Forks, home-made FEL quick attach to swap between these forks and the bucket, Dual rear remotes, CCM Top-N-Tilt, Woods SB60 snowblower, 66" United box blade, 60" back blade (cheapo, old and rusty), 60" KK rake, Woods PHD w/ 9" auger, Yanmar RS1303 3pt tiller, Kubota Ballast box (came with the tractor), Farm Force Carry All.
    '9? G1800S, 48" MMM. 70's Troy Bilt Horse tiller with new 6.5HP briggs engine.

    The means justify the ends.

  4. #4
    Veteran Member
    Join Date
    Oct 2008
    Posts
    1,013
    Location
    Mid. Coast Maine
    Tractor
    7610 hst

    Default Re: G1800/G1900/G2000/G5200/G6200 RC48-G20 mower guide wheel replacement

    Tractor Smart has them for 51.00 a piece,,,
    70000-00608 Gauge Wheel $51.05
    and they ave the bearing kt for much less..

  5. #5
    Platinum Member jas67's Avatar
    Join Date
    May 2008
    Posts
    985
    Location
    Central PA
    Tractor
    Kubota B7610 + Kubota G1800-S

    Default Re: G1800/G1900/G2000/G5200/G6200 RC48-G20 mower guide wheel replacement

    Quote Originally Posted by hr3 View Post
    Tractor Smart has them for 51.00 a piece,,,

    and they ave the bearing kt for much less..
    Their prices are pretty close to Messick's prices.
    '05 B7610 w/ LA352 FEL
    Everything Attachments Pin-on Pallet Forks, home-made FEL quick attach to swap between these forks and the bucket, Dual rear remotes, CCM Top-N-Tilt, Woods SB60 snowblower, 66" United box blade, 60" back blade (cheapo, old and rusty), 60" KK rake, Woods PHD w/ 9" auger, Yanmar RS1303 3pt tiller, Kubota Ballast box (came with the tractor), Farm Force Carry All.
    '9? G1800S, 48" MMM. 70's Troy Bilt Horse tiller with new 6.5HP briggs engine.

    The means justify the ends.

Similar Threads

  1. Buying Advice B3200 for a church
    By chrisargo in forum Kubota Buying/Pricing
    Replies: 25
    Last Post: 06-23-2010, 07:37 PM
  2. Replacement Finish Mower Blades
    By blackjack in forum Attachments
    Replies: 2
    Last Post: 01-27-2009, 09:35 PM
  3. Help identify old High wheel mower.
    By yazooman in forum General Lawn & Garden
    Replies: 0
    Last Post: 07-08-2008, 04:06 PM
  4. JD 4000 series wheel bolts
    By Anonymous Poster in forum John Deere Owning/Operating
    Replies: 5
    Last Post: 04-13-2002, 10:56 AM
  5. Chain of command
    By Anonymous Poster in forum John Deere Owning/Operating
    Replies: 9
    Last Post: 04-13-2002, 06:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.