skeeterbug
Member
- Joined
- Jan 7, 2013
- Messages
- 32
- Location
- Mifflinburg, Pa
- Tractor
- Kubota B2920 MMM, FEL, BX1860 mmm, Fel
I serviced my GR2000 on Saturday at 313 hours, When I took the hydraulic line off and removed the screen I used a 1/2 inch magnet and put it into the hole and got close to a teaspoon of metal shavings that were stopped by the screen.
My question is how many is to many?
There were some at 200 hours but i figured that is why they put the screen in. To catch the metal.
I really need someone that has done this themselves to give me their opinion on the amount stopped by the screen filter and collected on the magnet.
Locknut have you changed this before?
1/2" magnet
inlet hole
screen
My question is how many is to many?
There were some at 200 hours but i figured that is why they put the screen in. To catch the metal.
I really need someone that has done this themselves to give me their opinion on the amount stopped by the screen filter and collected on the magnet.
Locknut have you changed this before?
1/2" magnet
inlet hole
screen