How difficult to sharpen or replace the blades on a Kubota F model?? See for yourself

**JOHNTHOMAS** · 06-10-2013, 05:00 PM

How difficult to sharpen or replace the blades on a Kubota F model?? See for yourself-pict0006-jpg

How difficult to sharpen or replace the blades on a Kubota F model?? See for yourself-pict0007-jpg

How difficult to sharpen or replace the blades on a Kubota F model?? See for yourself-pict0008-jpg

Pull 4 spring loaded pins and twist into lock slot, remove handle from top of deck, insert it into a slot and pull or push till the shock is compressed and lock handle into slot on top of deck and finally pull/release another spring loaded lever that will spring forward and lock deck straight up when you lift it. No, that's not me, it's a friend that had the 30MM socket I needed to remove blades with my air wrench, a fine and handy tool.

**murphy1244** · 06-10-2013, 05:03 PM

What does this mean???

**JOHNTHOMAS** · 06-10-2013, 05:39 PM

Originally Posted by murphy1244

What does this mean???

Tough question Murph.

What do you mean?

**murphy1244** · 06-10-2013, 05:43 PM

Originally Posted by JOHNTHOMAS

Tough question Murph.

What do you mean?

easy! what does your post mean?

**JOHNTHOMAS** · 06-10-2013, 05:50 PM

Originally Posted by murphy1244

easy! what does your post mean?

Lets do it a line at a time.
How difficult to sharpen or replace the blades on a kubota F model?? See for yourself
Now what part of that do you not understand?

**murphy1244** · 06-10-2013, 05:52 PM

Originally Posted by JOHNTHOMAS

Lets do it a line at a time.
How difficult to sharpen or replace the blades on a Kubota F model?? See for yourself
Now what part of that do you not understand?

I see say's the blind man. Can you mount a snowblower on that? Does it have a quick hitch on the front?

**JOHNTHOMAS** · 06-10-2013, 05:59 PM

Originally Posted by murphy1244

I see say's the blind man. Can you mount a snowblower on that? Does it have a quick hitch on the front?

Yes, a snow blower can be mounted on it and one person is running a thread where he bought or stole (Cheap) one of these for the express purpose of mounting a snow blower. I don't think a quick hitch is offered by Kubota but someone may make one for it. Kubota offers snow blower and sweeper and maybe a blade but not sure if they offer anything else. These are my primary and actually my only mowers now and just use tractors for tractoring.

I have steep hillside acreage at home and have to have the 4wd option and I'm old so I want the comfort.

**murphy1244** · 06-10-2013, 06:07 PM

Originally Posted by JOHNTHOMAS

Yes, a snow blower can be mounted on it and one person is running a thread where he bought or stole (Cheap) one of these for the express purpose of mounting a snow blower. I don't think a quick hitch is offered by Kubota but someone may make one for it. Kubota offers snow blower and sweeper and maybe a blade but not sure if they offer anything else. These are my primary and actually my only mowers now and just use tractors for tractoring.

I have steep hillside acreage at home and have to have the 4wd option and I'm old so I want the comfort.

I was looking for something to compare to a Steiner or Ventrac.

**Dan W** · 06-19-2013, 06:17 PM

I bought a 57" blower and only got about 12 hours on it last winter, it did a fantastic job. Also installed the Curtis F5205 cab on it this summer, for next winter... An absolute must have, I won't so much like a snowman next winter.
There is 27HP shafts power on the F3680, plenty of power for snow
Dan

**Dan W** · 06-23-2013, 08:00 AM

Originally Posted by murphy1244

I see say's the blind man. Can you mount a snowblower on that? Does it have a quick hitch on the front?

BTW Murphy1244, to answer your question, yes there is a quick hitch adaptor for the Kubota blower,
it is a big steel triangular contraption which mounts to the 2 point hitch arms, it weigh maybe 75Lbs and installs in 10 to 15 minutes.
In fact it’s quite easy to reconfigure the lifting arms back to mower deck after the snow season.

Dan

Thread Tools

Search Thread

Display

How difficult to sharpen or replace the blades on a Kubota F model?? See for yourself

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Re: How difficult to sharpen or replace the blades on a Kubota F model?? See for your

Similar Threads

Opinion on to sharpen or not to sharpen a brush hogs blades

How often do you sharpen/replace blades on you rotary cutter?

Flail Mower Flail Knives. Sharpen or replace?

Chipper How often do you sharpen/replace wood chipper blades?

how difficult to replace rings on outboard

Posting Permissions

Tractor Discussions

Tractor Classifieds

Tractor Reviews

Tractor News